DN84 Datasheet

閱覽下載糾錯 0

掃碼查看芯片數據手冊

上傳產品規格書

DN84

ZXSC400 Driving 3W high power LEDs

Ray Liu, Applications Engineer, Zetex Semiconductors

Description

This design note shows the ZXSC400 driving a single 3W LED. The input voltage ranges from 1.8V

to 3.6V with constant output current of 700mA down to 2.6V with an overall 80% of efficiency.

Figure 1 shows typical constant current solution with ZXSC400 driving one 3W LED. The input

voltage range allows the use of two alkaline batteries or one Lithium Ion cell (CR123A) for

portable flashlight applications.

Q1 and Q2 forms a pseudo Darlington pair which provide enough current gain for a switching

current up to 1.5A. In order to provide better switch off performance, a Schottky diode, D2, is used

to drain the base current from the base of Q1 directly. In order to achieve higher efficiency, current

monitor U2 is used to provide a low voltage drop LED current sensing through the low ohmic

resistor, R2. The LED current is converted to 300mV feedback voltage through R3.

= 1.8V to 3V

Stdn

DRIVE

SENSE

SENSE+

SENSE-

OUT

ZXCT1009

GND

ZXSC400

Figure 1

Schematic diagram

Issue 1 - August 2007

漏 Zetex Semiconductors plc 2007

www.zetex.com

建議反饋