PRELIMINARY
CY7C1311BV18
CY7C1911BV18
CY7C1313BV18
CY7C1315BV18
18-Mbit QDR鈩?II SRAM 4-Word Burst
Architecture
Features
鈥?Separate Independent Read and Write data ports
鈥?Supports concurrent transactions
鈥?250-MHz clock for high bandwidth
鈥?4-Word Burst for reducing address bus frequency
鈥?Double Data Rate (DDR) interfaces on both Read and
Write ports (data transferred at 500 MHz) at 250 MHz
鈥?Two input clocks (K and K) for precise DDR timing
鈥?SRAM uses rising edges only
鈥?Two output clocks (C and C) account for clock skew
and flight time mismatching
鈥?Echo clocks (CQ and CQ) simplify data capture in
high-speed systems
鈥?Single multiplexed address input bus latches address
inputs for both Read and Write ports
鈥?Separate Port Selects for depth expansion
鈥?Synchronous internally self-timed writes
鈥?Available in 脳8, x9, 脳18, and 脳36 configurations
鈥?Full data coherency providing most current data
鈥?Core V
DD
= 1.8(+/-0.1V); I/O V
DDQ
= 1.4V to V
DD
)
鈥?15 脳 17 x 1.4 mm 1.0-mm pitch FBGA package, 165-ball
(11 脳 15 matrix)
鈥?Variable drive HSTL output buffers
鈥?JTAG 1149.1 compatible test access port
鈥?Delay Lock Loop (DLL) for accurate data placement
Functional Description
The CY7C1311BV18, CY7C1911BV18, CY7C1313BV18, and
CY7C1315BV18 are 1.8V Synchronous Pipelined SRAMs,
equipped with QDR鈩?II architecture. QDR-II architecture
consists of two separate ports to access the memory array.
The Read port has dedicated Data Outputs to support Read
operations and the Write port has dedicated Data Inputs to
support Write operations. QDR-II architecture has separate
data inputs and data outputs to completely eliminate the need
to 鈥渢urn-around鈥?the data bus required with common I/O
devices. Access to each port is accomplished through a
common address bus. Addresses for Read and Write
addresses are latched on alternate rising edges of the input
(K) clock. Accesses to the QDR-II Read and Write ports are
completely independent of one another. In order to maximize
data throughput, both Read and Write ports are equipped with
Double Data Rate (DDR) interfaces. Each address location is
associated with four 8-bit words (CY7C1311BV18) or 9-bit
words (CY7C1911BV18) or 18-bit words (CY7C1313BV18) or
36-bit words (CY7C1315BV18) that burst sequentially into or
out of the device. Since data can be transferred into and out
of the device on every rising edge of both input clocks (K and
K and C and C), memory bandwidth is maximized while simpli-
fying system design by eliminating bus 鈥渢urn-arounds鈥?
Depth expansion is accomplished with Port Selects for each
port. Port selects allow each port to operate independently.
All synchronous inputs pass through input registers controlled
by the K or K input clocks. All data outputs pass through output
registers controlled by the C or C input clocks. Writes are
conducted with on-chip synchronous self-timed write circuitry.
Configurations
CY7C1311BV18鈥?M x 8
CY7C1911BV18鈥?M x 9
CY7C1313BV18鈥?M x 18
CY7C1315BV18鈥?12K x 36
Cypress Semiconductor Corporation
Document Number: 38-05620 Rev. **
鈥?/div>
3901 North First Street
鈥?/div>
San Jose
,
CA 95134
鈥?/div>
408-943-2600
Revised July 23, 2004
next