錚?/div>
interleaved or linear burst sequences
鈥?Separate processor and controller address strobes
鈥?Synchronous self-timed write
鈥?Asynchronous output enable
鈥?Offered in JEDEC-standard 100-pin TQFP and 119-ball
BGA packages
鈥?鈥淶Z鈥?Sleep Mode option
minimum glue logic. Maximum access delay from clock rise is
6.5 ns (133-MHz version). A 2-bit on-chip counter captures the
first address in a burst and increments the address automati-
cally for the rest of the burst access. All synchronous inputs
are gated by registers controlled by a positive-edge-triggered
Clock Input (CLK). The synchronous inputs include all
addresses, all data inputs, address-pipelining Chip Enable
(CE
1
), depth-expansion Chip Enables (CE
2
and CE
3
), Burst
Control inputs (ADSC, ADSP, and ADV), Write Enables
(BW
[A:B]
, and BWE), and Global Write (GW). Asynchronous
inputs include the Output Enable (OE) and the ZZ pin.
The CY7C1325F allows either interleaved or linear burst
sequences, selected by the MODE input pin. A HIGH selects
an interleaved burst sequence, while a LOW selects a linear
burst sequence. Burst accesses can be initiated with the
Processor Address Strobe (ADSP) or the cache Controller
Address Strobe (ADSC) inputs.
Addresses and chip enables are registered at rising edge of
clock when either Address Strobe Processor (ADSP) or
Address Strobe Controller (ADSC) are active. Subsequent
burst addresses can be internally generated as controlled by
the Advance pin (ADV).
The CY7C1325F operates from a +3.3V core power supply
while all outputs may operate with either a +2.5 or +3.3V
supply. All inputs and outputs are JEDEC-standard
JESD8-5-compatible.
Functional Description
[1]
The CY7C1325F is a 262,144 x 18 synchronous cache RAM
designed to interface with high-speed microprocessors with
Logic Block Diagram
A0,A1,A
MODE
ADDRESS
REGISTER
A[1:0]
ADV
CLK
BURST Q1
COUNTER AND
LOGIC
CLR
Q0
ADSC
ADSP
DQ
B
,DQP
B
WRITE REGISTER
DQ
B
,DQP
B
WRITE DRIVER
BW
B
MEMORY
ARRAY
SENSE
AMPS
OUTPUT
BUFFERS
BW
A
BWE
GW
DQ
A
,DQP
A
WRITE REGISTER
DQ
A
,DQP
A
WRITE DRIVER
INPUT
REGISTERS
DQs
DQP
A
DQP
B
CE
1
CE
2
CE
3
OE
ENABLE
REGISTER
ZZ
SLEEP
CONTROL
Note:
1. For best鈥損ractices recommendations, please refer to the Cypress application note
System Design Guidelines
on www.cypress.com.
Cypress Semiconductor Corporation
Document #: 38-05215 Rev. *B
鈥?/div>
3901 North First Street
鈥?/div>
San Jose
,
CA 95134
鈥?/div>
408-943-2600
Revised January 13, 2004
next