5
.064 [1.626]MAX
.26 [6.604]MAX
4
WHERE SHOWN, USING A PERMANENT MARKING METHOD
MARK PART NUMBER AND REVISION
BOTTOM CORE LOCATED AS SHOWN
6
APPLY ONE KAPTON TAPE TO COVER THE EDGES OF
6
THE SMT LEADS MUST REST FLAT ON PCB, CO-PLANAR
FILL WINDING AND CORE WITH EPOXY 2 PART A&B (600擄F,315擄C)
5
REMOVE INSULATION AND TIN LEADS APPROX. 0.1 INCH
HELIX WIND 3 TURNS TIGHT TO CORE AND EVENLY SPACED
CONSTRUCTION:
HI-POT (2 SECOND, 5mA MAX.) 300 VRMS WINDING TO CORE
DCR = 4.0 MILLI-OHM, MAX.
CURRENT RATING = 12 AMPS DC, MAX
L= 2.0 uH 鹵 10%, 10 KHz, 0.250 Vrms, 0 AMPS DC
SPECIFICATIONS:
.35 [8.9]
MAX.
TOP VIEW
2
KAPTON TAPE
.08 [2.0]
.26 [6.6]
MAX.
6
KAPTON TAPE
2
SCHEMATIC
.12 [3.1]鹵.03"
.1 [2.54]鹵.03"
SIDE VIEW
.20 [5.1]
MAX.
.08 [2.0]
.19 [4.8]
FOOT PRINT
2
EPOXY: 2 PARTS A & B (600擄F, 315擄C)
WIRE: UL RECOGNIZED 200擄C RATED MAGNET WIRE, JIS C3102
CWS BYTEMARK OR OTHER APPROVED PART,
CORE: MPP
HELICAL COIL RATING 200擄C REQUIRED
MATERIAL: UL RECOGNIZED 94V-0 FOR FLAMMABILITY
COILWS COM, INC
1
CWS Coil Winding Specialist.
12 Amps Output Choke
(1.5 mm x 0.4 mm )
1
