IMAGE SENSOR
CCD multichannel detector head
C7973
Designed for back-thinned CCD area image sensor
C7973 is a high sensitivity multichannel detector head for use with back-thinned FFT-CCD area image sensors (S7963, S7964, S7965) that offer
high UV sensitivity and quantum efficiency. C7973 incorporates a low-noise driver/amplifier circuit that provides reliable operation from simple
external signals. C7973 includes a highly stable temperature controller that cools the sensor to a preset temperature level (Ts= -10 藲C) as soon as
the power is turned on. If the cooler fails and causes internal circuitry to overheat, the built-in protection circuit automatically turns off the power to
the thermoelectric cooler. Despite its compact size, the housing configuration is designed for good heat dissipation, and threaded mounting holes
on the front panel allow connections to other devices such as monochrometers.
Features
Applications
Cooling temperature: -10 鹵 0.05 藲C
(Ta=10 to 35 藲C)
l
Simple signal input operation
l
Compact configuration
l
Designed for back-thinned CCD area image sensor *
1
l
Line binning operation/area scanning operation *
2
l
Driver/amplifier circuit for low noise CCD operation
l
Highly stable temperature controller
l
Fluorescence spectroscopy
l
Raman spectroscopy
l
Other low-light-level detection
The table below shows CCD area image sensors applicable for C7973.
Since C7973 does not include a
CCD area image sensor, so select the desired sensor and order it
separately.
CCD area image sensor
Type No.
S7963
S7964
S7965
Number of pixels
80 脳 72
124 脳 56
232 脳 56
Number of active pixels
64 脳 64
108 脳 48
216 脳 48
*1: In normal CCD image sensors that receive light from the front surface, the active area is covered with electrodes for charge transfer.
These electrodes cut off UV radiation incident on the image sensor and also reduce the quantum efficiency. In contrast, back-
thinned CCD image sensors have a unique structure in which the back of the active area is finely ground to allow light to enter from
the back surface. This structure ensures high UV sensitivity and quantum efficiency because incident light need not pass through the
electrodes.
*2: The FFT-CCD was originally designed as a two-dimensional image sensor. However, it can be operated like a linear image sensor
having a large active area by transferring all the pixel signals in the vertical direction to the horizontal register (this is referred to as
line binning).
Active area
[mm (H) 脳 mm (V)]
1.536 脳 1.536
2.592 脳 1.152
5.184 脳 1.152
1
1
2
3
4
5
6
7
