B72G
EXCELON廬72
General Purpose Filter/Regulator
1/4", 3/8" Port Sizes
q
EXCELON design allows in-line installation or
modular installation with other Excelon 72 products
q
High efficiency water and particle removal
q
Quick release bayonet bowl
q
Patented quarter turn manual drain
q
Highly visible, prismatic liquid level indicator lens on
metal bowls
q
Full flow gauge ports
q
Balanced valve design for optimum pressure control
q
Push to lock adjusting knob with tamper resistant
accessory
Technical Data
Fluid: Compressed air
Maximum pressure:
Transparent bowl:
10 bar (145 psig)
Metal bowl:
With manual or semi automatic drain: 17 bar (250 psig)
With automatic drain: 8 bar (116 psig)
Operating temperature*:
Transparent bowl: -20擄 to +50擄C (0擄 to +125擄F)
Metal bowl: -20擄 to +65擄C (0擄 to +150擄F)
* Air supply must be dry enough to avoid ice formation at temperatures below 2擄C (35擄F).
Partical removal: 5 碌m, 25 碌m or 40 碌m. Within ISO 8573-1, Class
3 and Class 5
Typical flow at 10 bar (145 psig) inlet pressure, 6,3 bar
(90 psig) set pressure and a droop of 1 bar (15 psig) from set:
38 dm
3
/s (80 scfm)
Manual drain thread: 7/16-24 UNS male for 1/4" tube nut and
ferrule
Semi automatic drain connection: 8 mm (5/16") ID tube
Semi automatic drain operating pressure:
Drain closes when bowl pressure exceeds 0,1 bar (1.5 psig)
and opens when bowl pressure drops below 0,1 bar (1.5 psig).
Can be operated manually by lifting the stem.
Automatic drain connection: ISO R1/8
Automatic drain operating conditions:
Minimum flow to close drain: 0,14 dm
3
/s (0.3 scfm)
Drain closes when bowl pressure exceeds 0,7 bar (10 psig)
and opens when bowl pressure drops below 0,07 bar (1 psig).
Gauge ports:
1/8" PTF with PTF main ports
1/8" ISO Rc with ISO Rc main ports
1/8" ISO Rc with ISO G main ports
Nominal bowl size:
Short bowl: 56 ml (1.9 ounce)
Long bowl: 65 ml (2.2 ounce)
1/97
Materials:
Body: Zinc
Bonnet: Acetal
Valve: Brass
Bowl:
Transparent: Polycarbonate
Metal: Zinc
Metal bowl liquid level indicator lens:
Transparent nylon
Element: Sintered polypropylene
Elastomers: Neoprene and nitrile
Ordering Information
See
Ordering Information
on the following
pages.
ISO Symbols
Automatic and
Semi Automatic Drain
Relieving
Manual Drain
Relieving
Automatic and
Semi Automatic Drain
Non Relieving
Manual Drain
Non Relieving
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
N/AL.8.160.300.01
1
2
3
4
