鈥?/div>
Full Field Image Sensor 3500 x 2300 Pixels
Pixel 10 碌m x 10 碌m Photo-MOS with 100% Aperture
Image Zone: 35 mm x 23 mm
Frame Readout Through One, Two or Four Outputs
Built-in Region of Interest Structure
Data Rates Up to 4 x 25 MHz (Compatibility with 10 Frames/Seconds)
High Dynamic Range (Up to 3000), at Room Temperature and at 25 MHz Frequency
Very Low Dark Current (MPP Mode)
Optimized Resolution and Responsivity in the 400 - 1100 nm Spectrum
Additional Full-frame Operating Modes
鈥?2627 x 2300 pixels of 10 碌m x 10 碌m (3 zones)
鈥?Binning 4 x 4 Pixels (Format 875 x 575 Pixels of 40 碌m x 40 碌m)
鈥?Binning 2 x 2 Pixels (Format 1750 x 1150 Pixels of 20 碌m x 20 碌m)
鈥?/div>
On-request Frame Transfer Architecture
鈥?1750 Active Lines, One Memory Zone with Frame Readout
Through One or Two Outputs
鈥?1750 Active Lines, Two Memories Zones with Frame Readout
Through Two or Four Outputs
鈥?/div>
Flexibility and Performance Make Device Suitable for Digital Photography, Graphic
Arts, Medical and Industrial Applications
8M-pixel Image
Sensor
AT71200M
Description
Atmel鈥檚 AT71200M is a full-frame sensor based on charge-coupled device (CCD)
technology. It can be used in a wide range of applications thanks to operating mode
flexibility, very high definition and high dynamic range.
The nominal photosensitive area is made up of 2300 x 3500 useful pixels and is split
into four independent zones that are driven separately by four independant four-phase
clocksets. Thus the sensor can be used in up to 15 main modes.
The large format and high definition make the device suitable for any application
requiring precision and accuracy.
The high sensitivity of the 10 碌m x 10 碌m pixels with 100% aperture provides a large
bandwidth of response with up to 1100 nm wavelength.
Two serial registers and four independent output amplifiers offer a high-frequency
functionality of up to 17 frames per second and a 12-bit dynamic range.
Rev. 2134A鈥揑MAGE鈥?2/03
1
next