The APD-128G064A DC plasma display offers viewing qualities designers seek such as high contrast, viewing angle of 150擄
minimum and excellent readability. Its bright (50 foot lambert minimum) with characters and graphics figures presented in a
pleasing neon orange color against a black background. Plasma is much more readable and eye-pleasing than liquid crystal or
vacuum fluorescent displays and is filterable to red, amber or neutral density.
These plasma display panels are driven in a standard row-column refresh method much like a CRT display. The designer need
only supply TTL level signals for SERIAL DATA, DOT CLOCK, COLUMN LATCH, ROW DATA, ROW CLOCK and DISPLAY
ENABLE. The SERIAL DATA is entered with the DOT CLOCK up to frequencies as high as 8mHz. After a row of 128 pixels is
clocked in, the COLUMN LATCH signal is toggled and the data is latched. At the time the data is latched, the display is briefly
disabled using the DISPLAY ENABLE signal, then the row pointer is advanced with the ROW CLOCK signal. Once each frame
the ROW DATA must be asserted to synchronize the column serial data with the beginning row. The recommended scanning
frequency is approximately 70 Hz, but may be as high as 200 Hz. The high clock rate on the data clock allows for rapid refresh
and maximum access time to the refresh ram.
ELECTRICAL SPECIFICATIONS
Power Required:
Typical = 12 watts.
Maximum = 35 watts.
Maximum Current Requirements:
I
cc
(V
cc
logic) - 0.050 Amps.
I
sp
(Column driver supply) - 0.192 Amps.
I
sn
(Row driver supply) - 0.192 Amps.
I
rw
(Row driver logic) - 0.010 Amps.
DIMENSIONS
in inches [millimeters]
128 x 64 Full Field
Column 1,
Row 1
14.50 [368.30]
7.40 [187.96]
.150
[3.81]
OPTICAL SPECIFICATIONS
Viewing Area:
12.75" [323.85mm] W x 6.35" [161.29mm] L
Character Array:
21 characters per line, 8 lines of
characters.
Character Size:
0.65" [16.51mm] H x 0.45" [11.43mm] W.
Pixel Size:
0.050" [1.27mm] square.
Pixel Pitch:
0.100" [2.54mm].
Luminance:
50 foot lamberts minimum.
Contrast Ratio:
> 20:1.
7.825
[198.76]
Center of
Display Area
4.062
[103.17]
6.35
[161.29]
7.275
[184.78]
8.125
[206.38]
STANDARD ELECTRICAL SPECIFICATIONS*
DESCRIPTION
Logic Supply
Anode Supply
Cathode Supply
Cathode Control**
Total + V
sp
& - V
sn
Logic 1 Input
Logic 0 Input
SYMBOL
V
cc
V
sp
V
sn
V
rw
V
tot
V
ih
V
il
MIN.
+ 4.5
鈥?/div>
鈥?/div>
+ 10.8
170
2.0
鈥?/div>
TYP.
+ 5.0
+ 75
- 110
+ 12.0
185
鈥?/div>
鈥?/div>
MAX.
+ 5.5
+ 80
- 125
+ 15.0
205
鈥?/div>
0.8
UNITS
VDC
VDC
VDC
VDC
VDC
VDC
VDC
.150
[3.81]
7.25 [184.15]
12.75 [323.85]
13.775 [349.88]
.487
[12.37]
.450
[11.43]
Max.
Pin #1
of P1
4.15
C [105.41]
L
7.40 [187.96]
C
L
10.50 [266.70]
.888
[22.56]
14.80 [375.92]
1.025
[26.04]
.447
鹵
.020
[11.35
Pin #1
.062 [1.575]
鹵
.508]
of P2
PCB
Thickness
C
L
*Recommended operating voltages. All maximums are to be
considered absolute maximum.
**V
rw
is referenced to V
sn
.
ORDERING INFORMATION
DESCRIPTION
PART NUMBER
Display Module with Drivers and TTL Interface ............................................................................................. APD-128G064A
Display Module with Drivers, TTL Interface and On Board DC Converter ................................................. APD-128G064A-1
Data Connector Kit ................................................................................................................................................. 280105-05
Power Connector Kit .............................................................................................................................................. 280108-12
VISHAY
1
