Preliminary Technical Data
FEATURES
Quad Parametric Measurement Unit With
Integrated 16-Bit Level Setting DACs
AD5522
PRODUCT OVERVIEW
The AD5522 is a high performance, highly integrated parametric
measurement unit consisting of four independent channels. Each
PPMU channel includes five, 16-bit, voltage out DACs setting the
programmable inputs levels for the force voltage input, clamp and
comparator inputs (high and low). Five programmable force and
measure current ranges are available ranging from 5碌A(chǔ) to 64mA.
Four of these ranges use on chip sense resistors, while a high
current range up to 64mA is available per channel using off chip
sense resistors. Currents in excess of 64mA require an external
amplifier. Low capacitance DUT connections (FOH, EXT FOH)
ensure the device is suited to relay less test systems.
The PMU functions are controlled via a simple three wire serial
interface compatible with SPI/QSPI/Microwire and DSP interface
standards. Interface clocks of 50MHz allow fast updating of modes.
LVDS (Low Voltage Differential Signaling) interface protocol at
100MHz is also supported. Comparator outputs are provided per
channel for device go no-go testing and characterization. Control
registers provide easy way of changing force or measure conditions,
DAC levels and selected current ranges. SDO (serial data out)
allows the user to readback information for diagnostic purposes.
Quad Parametric Measurement Unit
FV, FI, FN, MV, MI Functions
4 Programmable Current Ranges (Internal R
SENSE
)
5uA, 20uA, 200uA and 2mA
1 Programmable Current Range up to 64mA (external R
SENSE
)
22.5 V FV Range with Asymmetrical Operation
Integrated 16-Bit DACs Provide Programmable Levels
Offset and Gain Correction on Chip
Low Capacitance Outputs Suited to Relay Less Systems
On-chip Comparators Per Channel
FI Voltage Clamps & FV Current Clamps
Guard Drive Amplifier
System PMU connections
Programmable Temperature Shutdown Feature
SPI/Microwire/DSP & LVDS Compatible Interfaces
Compact 80 lead TQFP Package with Exposed Pad (Top Or
Bottom)
APPLICATIONS
Automatic Test Equipment (ATE)
per pin Parametric Measurement Unit
Continuity & Leakage Testing
Device Power Supply
Instrumentation
SMU (Source Measure Unit)
Precision Measurement
AGND
AVSS(0-4) AVDD(0-4)
DVCC
DGND
CCOMP (0-3)
SYS_FORCE
SYS_SENSE
VREF
16
REFGND
16
16
X1 REG
M REG
C REG
16
X2 REG
*2
*2
16-Bit
CLH DAC
x4
FIN
SW 1
AGNDx
EN
EXTFOH(0-3)
CLH
SW 3
CFF(0-3)
OFFSET DAC
*6
16
16
16
INTERNAL RANGE SELECT
(5uA, 20uA, 200uA, 2mA)
FORCE
AMPLIFER
60鈩?/div>
1k鈩?/div>
X1 REG
M REG
C REG
*6
16
16-Bit
FIN DAC
X2 REG
+
-
FOH(0-3)
RSENSE
SW 4
SW 6
SW 7
SW 5
SW 2
16
16
16
16
X1 REG
M REG
C REG
X2 REG
*2
*2
16-Bit
CLL DAC
SW 10
OFFSET DAC
BIAS TO
CENTER
IRANGE
CLL
EXTMEASIH(0-3)
+
-
SW 8
10k鈩?/div>
EXTMEASIL(0-3)
SW 9
+
x5 or x10
MEASOUT (0-3)
SW 12
MEASOUT
MUX & GAIN
x1/x0.2
-
TEMP
SENSOR
SW 11
MEASURE
CURRENT
IN AMP
+
-
EXTERNAL
RSENSE
(CURRENTS
UP TO 64mA)
AGND (0-3)
16
16
16
*6
X1 REG
M REG
C REG
*6
X1 REG
M REG
C REG
*6
16
MEASVH (0-3)
+
-
GUARD (0-3)
GUARD AMP
SW 14
SW 16
X2 REG
16-Bit
CPH DAC
AGNDx
x1
+
-
MEASURE
VOLTAGE
IN AMP
SW 13
DUT
16
16
16
CPH
*6
16
CPL
16-Bit
CPL DAC
+
-
DUTGND
GUARDIN (0-3)/
DUTGND (0-3)
DUTGND
X2 REG
-
COMPARATOR
+
- +
SW 15
10k鈩?/div>
AGNDx
16
16-Bit
OFFSET
DAC
16
TO ALL DAC
OUTPUT
AMPLIFIERS
SERIAL
INTERFACE
TO
MEASOUT
MUX
TEMP
SENSOR
CLAMP &
GUARD
ALARM
TMPALM
POWER ON
RESET
CGALM
RESET
SDO
SCLK SDI SYNC BUSY
LOAD
LVDS/ CPOL0/
SCLK
SPI
CPOH0/
SDI
CPOL1/
SYNC
CPOH1/
SDO
CPOL2
CPOH2 CPOL3
/CPO0
/CPO1 /CPO2
CPOH3
/CPO3
Figure 1. Functional Block Diagram
Rev.PrL
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
漏2006 Analog Devices, Inc. All rights reserved.
next