廬
RETRIEVING DATA FROM THE DDC112
by Jim Todsen
This application bulletin explains how to retrieve data from
the DDC112. It elaborates on the discussion given in the
DDC112 data sheet and provides additional information to
allow you more flexibility during retrieval. It is assumed
that you have a basic understanding of the DDC112鈥檚
operation. For a good introduction to the DDC112, see the
DDC112鈥檚 data sheet.
There are three main sections to this bulletin. First, the basic
operation of data retrieval is explained for a single DDC112
system. Next, a circuit and timing diagram are discussed that
use additional logic circuits to convert the serial bitstream
from the DDC112 into multi-bit words for parallel readback.
Finally, data retrieval considerations for multiple DDC112
systems are covered.
Sensor
Sensor
DDC112
IN1
ADC
IN2
DCLK
Data Retrieval
Inputs
DXMIT
DIN
IN1 Data
Holding Register
IN1 Data
20 Bits
IN2 Data
20 Bits
DVALID
DOUT
Data Retrieval
Outputs
40-Bit Shift Register
FIGURE 1. Serial Interface Block Diagram.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user鈥檚 own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
漏
1998 Burr-Brown Corporation
AB-136
1
Printed in U.S.A. August, 1998