鈻?/div>
Small package size
Description
The A3290 and A3291 Hall effect latches are extremely
temperature-stable and stress-resistant sensors, especially
suited for operation over extended temperature ranges (up
to 125擄C). Superior high-temperature performance is made
possible through Dynamic Offset Cancellation, which reduces
the residual offset voltage normally caused by device package
overmolding, temperature dependencies, and thermal stress. The
two devices are identical except for their magnetic switchpoints.
They are not intended for automotive applications.
Both devices include, on a single silicon chip, a voltage regulator,
a Hall-voltage generator, a small-signal amplifier, chopper
stabilization, a Schmitt trigger, and a short-circuit protected
open-collector output to sink up to 25 mA. A south polarity
magnetic field of sufficient strength is required to turn the output
on. A north polarity field of sufficient strength is necessary to
turn the output off. An onboard regulator permits operation
with supply voltages in the range of 4.2 to 24 volts.
Two package styles provide a magnetically optimized package
for most applications. Type LH is a miniature SOT23W low-
profile surface-mount package, and type UA is a three-pin
ultramini SIP for through-hole mounting. Both packages are
lead (Pb) free with 100% matte tin leadframe plating.
Packages: 3 pin SOT23W (suffix LH), and
3 pin SIP (suffix UA)
Not to scale
Functional Block Diagram
VCC
Regulator
OUT
Sample and Hold
Dynamic Offset
Cancellation
Low-Pass
Filter
Control
Amp
Current Limit
1
GND
A3290-DS