音影先锋亚洲天堂网|电影世界尽头的爱完整版播放|国产 熟女 91|高清无码免费观看欧美日韩|韩国一区二区三区黄色录像|美女亚洲加勒比在线|亚洲综合网 开心五月|7x成人在线入口|成人网站免费日韩毛片区|国产黄片?一级?二级?三级

A29040ASERIES Datasheet

  • A29040ASERIES

  • 512K X 8 Bit CMOS 5.0 Volt-only. Uniform Sector Flash Memory

  • 291.85KB

  • 30頁

  • ETC

掃碼查看芯片數據手冊

上傳產品規格書

PDF預覽

A29040A Series
512K X 8 Bit CMOS 5.0 Volt-only,
Preliminary
Features
n
5.0V
鹵
10% for read and write operations
n
Access times:
- 55/70/90 (max.)
n
Current:
- 20 mA typical active read current
- 30 mA typical program/erase current
- 1
碌A(chǔ)
typical CMOS standby
n
Flexible sector architecture
-
8 uniform sectors of 64 Kbyte each
-
Any combination of sectors can be erased
-
Supports full chip erase
-
Sector protection:
A hardware method of protecting sectors to prevent
any inadvertent program or erase operations within
that sector
n
Embedded Erase Algorithms
- Embedded Erase algorithm will automatically erase
the entire chip or any combination of designated
sectors and verify the erased sectors
- Embedded Program algorithm automatically writes
and verifies bytes at specified addresses
Typical 100,000 program/erase cycles per sector
20-year data retention at 125擄C
- Reliable operation for the life of the system
Compatible with JEDEC-standards
- Pinout and software compatible with single-power-
supply Flash memory standard
-
Superior inadvertent write protection
Data
Polling and toggle bits
-
Provides a software method of detecting completion
of program or erase operations
Erase Suspend/Erase Resume
-
Suspends a sector erase operation to read data from,
or program data to, a non-erasing sector, then
resumes the erase operation
Package options
-
32-pin P-DIP, PLCC, or TSOP (Forward type)
Uniform Sector Flash Memory
n
n
n
n
n
n
General Description
The A29040A is a 5.0 volt-only Flash memory organized as
524,288 bytes of 8 bits each. The 512 Kbytes of data are
further divided into eight sectors of 64 Kbytes each for flexible
sector erase capability. The 8 bits of data appear on I/O
0
- I/O
7
while the addresses are input on A0 to A18. The A29040A is
offered in 32-pin PLCC, TSOP, and PDIP packages. This
device is designed to be programmed in-system with the
standard system 5.0 volt VCC supply. Additional 12.0 volt VPP
is not required for in-system write or erase operations.
However, the A29040A can also be programmed in standard
EPROM programmers.
The A29040A has a second toggle bit, I/O
2
, to indicate
whether the addressed sector is being selected for erase, and
also offers the ability to program in the Erase Suspend mode.
The standard A29040A offers access times of 55, 70 and 90
ns, allowing high-speed microprocessors to operate without
wait states. To eliminate bus contention the device has
separate chip enable (
CE
), write enable (
WE
) and output
enable (
OE
) controls.
The device requires only a single 5.0 volt power supply for
both read and write functions. Internally generated and
regulated voltages are provided for the program and erase
operations.
The A29040A is entirely software command set compatible
with the JEDEC single-power-supply Flash standard.
Commands are written to the command register using
standard microprocessor write timings. Register contents
serve as input to an internal state-machine that controls the
erase and programming circuitry. Write cycles also internally
latch addresses and data needed for the programming and
erase operations. Reading data out of the device is similar to
reading from other Flash or EPROM devices.
Device programming occurs by writing the proper program
command sequence. This initiates the Embedded Program
algorithm - an internal algorithm that automatically times the
program pulse widths and verifies proper program margin.
Device erasure occurs by executing the proper erase
command sequence. This initiates the Embedded Erase
algorithm - an internal algorithm that automatically
preprograms the array (if it is not already programmed)
before executing the erase operation. During erase, the
device automatically times the erase pulse widths and
verifies proper erase margin.
PRELIMINARY
(December, 2002, Version 0.2)
1
AMIC Technology, Corp.

A29040ASERIES相關型號PDF文件下載

您可能感興趣的PDF文件資料

熱門IC型號推薦

掃碼下載APP，
一鍵連接廣大的電子世界。

在線人工客服

買家服務：
賣家服務：
技術客服：

0571-85317607

網站技術支持

13606545031

客服在線時間周一至周五
9:00-17:30

關注官方微信號，
第一時間獲取資訊。

建議反饋
返回頂部

建議反饋

聯系人：

聯系方式：

按住滑塊，拖拽到最右邊
>>
感謝您向阿庫提出的寶貴意見，您的參與是維庫提升服務的動力！意見一經采納，將有感恩紅包奉上哦！