鈮?/div>
t
PHL
OPERATING VOLTAGE RANGE:
V
CC
(OPR) = 4.5V to 5.5V
PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 374
IMPROVED LATCH-UP IMMUNITY
LOW NOISE V
OLP
= 0.9V (Max.)
SOP
TSSOP
ORDER CODES
PACKAGE
SOP
TSSOP
T UBE
74VHCT374AM
T& R
74VHCT374AMTR
74VHCT374ATTR
DESCRIPTION
The 74VHCT374A is an advanced high-speed
CMOS OCTAL D-TYPE FLIP FLOP with 3
STATE OUTPUT NON INVERTING fabricated
with sub-micron silicon gate and double-layer
metal wiring C
2
MOS technology.
This 8 bit D-Type flip-flop is controlled by a clock
input (CK) and an output enable input (OE).
On the positive transition of the clock, the Q
outputs will be set to the logic state that were
PIN CONNECTION AND IEC LOGIC SYMBOLS
setup at the D inputs.
While the (OE) input is low, the 8 outputs will be
in a normal logic state (high or low logic level)
and while high level the outputs will be in a high
impedance state.
The output control does not affect the internal
operation of flip flops; that is, the old data can be
retained or the new data can be entered even
while the outputs are off.
Power down protection is provided on all inputs
and outputs and 0 to 7V can be accepted on
inputs with no regard to the supply voltage. This
device can be used to interface 5V to 3V.
All inputs and outputs are equipped with
protection circuits against static discharge, giving
them 2KV ESD immunity and transient excess
voltage.
February 2000
1/10