鈮?/div>
t
PHL
OPERATING VOLTAGE RANGE:
V
CC
(OPR) = 2V to 5.5V
PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 573
IMPROVED LATCH-UP IMMUNITY
LOW NOISE: V
OLP
= 0.9V (MAX.)
SOP
TSSOP
Table 1: Order Codes
PACKAGE
SOP
TSSOP
T&R
74VHC573MTR
74VHC573TTR
DESCRIPTION
The 74VHC573 is an advanced high-speed
CMOS OCTAL D-TYPE LATCH with 3 STATE
OUTPUTS NON INVERTING fabricated with
sub-micron silicon gate and double-layer metal
wiring C
2
MOS technology.
These 8 bit D-Type latch are controlled by a latch
enable input (LE) and an output enable input (OE).
While the LE inputs is held at a high level, the Q
outputs will follow the data input precisely. When
the LE is taken low, the Q outputs will be latched
Figure 1: Pin Connection And IEC Logic Symbols
precisely at the logic level of D input data. While
the (OE) input is low, the 8 outputs will be in a
normal logic state (high or low logic level) and
while (OE) is in high level, the outputs will be in a
high impedance state.
Power down protection is provided on all inputs
and 0 to 7V can be accepted on inputs with no
regard to the supply voltage. This device can be
used to interface 5V to 3V.
All inputs and outputs are equipped with
protection circuits against static discharge, giving
them 2KV ESD immunity and transient excess
voltage.
November 2004
Rev. 5
1/14