A-BRIGHT
Part Number: 61-24UWC
A-BRIGHT INDUSTRIAL CO., LTD.
SURFACE MOUNT LED LAMPS
Power White Surface Mount Device
Package outlines & Re-flow Profile
Reflow Temp/Time
Soldering iron
Basic spec is 5sec when 260鈩? If temperature is higher,
time should be shorter (+10鈩?-1sec ).Power dissipation
of iron should be smaller than 15W, and temperatures
should be controllable .Surface temperature of the device
should be under 230鈩?.
ITEM
Resin (mold)
Lens color
Printed circuit board
Emitted color
For reflow soldering (Propose)
Material
MATERIALS
Epoxy
Yellow Diffused
BT
White
InGaN
NOTES:
1. All dimensions are in millimeters (inches);
2. Tolerances are
鹵0.1mm
(0.004inch) unless otherwise
noted.
3. Polarity referring onto the cathode mark is reversed on the
red.