3.2mm Round
廬
Optopipe
廬
Optical Light Pipe, 2 Array, Panel Mounted
19.05
[.75]
REF
2.79
[.110] REF
515-1033
LEDs for use with
515-1033
Recommended
PAGE #
6-44
6-44
6-44
6-17
6-9
6-11
6-13
6-15
6-9
6-11
6-13
6-15
6-9
6-11
6-13
6-15
DIFFUSED
FRONT SURFACES
DIRECTION
OF LIGHT
.99
[.039] TYP
.61
[.024]
4.57
[.18] TYP
(2) PLACES
13.97
[.550]
脴 5.08
[.200]
(2) PLACES
FRONT
PANEL
TO
P
SURFACE
OF LED
.51
[.020]
MAX
1.78
[.07]
脴 3.20
[.126]
2 PLACES
MAJOR DIA.
脴 3.71 [0.146]
PRESS-FI
T
RIBS
TYP, 3 PLCS
4.32
[.17]
Dimensions in mm [inches]
Features
鈥?High transmissivity polycarbonate material
鈥?UL94V-0 compliance
鈥?ESD protection (circuit isolation from front panel)
鈥?Wide viewing angle
鈥?Arrays reduce insertion costs
鈥?Secures to panel by press-fit
(Also recommend supplement means of securing --
for example, clamping)
521-9247
521-9249
521-9251
550-xx10
550-5504
550-5505
550-5507
550-5508
550-5604
550-5605
550-5607
550-5608
550-5704
550-5705
550-5707
550-5708
Alternatives
521-9430
521-9431
521-9432
4-61
4-61
4-61
LED alternatives may not produce optimum light
output
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Operating/Storage Temperature
鈥?0擄C to +100擄C
Dialight
Optopipe
廬
Light Pipe Description
This Optopipe
廬
is clamped to the inside of the plastic panel. The light pipe is not attached to the PCB at any point but
floats in front of it. The splines on the tubular section on the right hand side hold the light pipe in place for the clamping
operation. The funnel end faces the light source. The tubular sections fit through the plastic panel. The light emitting sur-
face is textured to diffuse the light passing through it. The light source can be any super-bright 2mm, 3mm, or 5mm LED,
or one of Dialight鈥檚 597 Series SMT LEDs. The light source鈥檚 emitting surface should be located no more than 0.020" or
0.5mm from the Optopipe
廬
. The light sources are mounted in a straight line facing the rear of the light pipe on a 14mm pitch.
The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index.
Dialight can provide custom Optopipe
廬
solutions for your applications.
Dialight Corporation 鈥?1501 Route 34 South 鈥?Farmingdale, NJ 07727 鈥?TEL: (732) 919-3119 鈥?FAX: (732) 751-5778 鈥ww.dialight.com
DIALIGHT
1
