鈥?/div>
High transmissivity polycarbonate material
UL94V-0 compliance
ESD protection (circuit isolation from front panel)
Wide viewing angle
Arrays reduce insertion costs
Secures to PCB by press-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Operating/Storage Temperature
鈥?0擄C to +100擄C
Dialight
Optopipe
廬
Light Pipe Description
This Optopipe
廬
mimics a 5-position array of 2 x 5mm LEDs, and functions as a through-the-panel indicator. Each ele-
ment has a diffused viewing surface and a shallow V-groove that permits easy customer removal of unwanted elements.
The array is held in place by 2 press-fit pins located beneath the second and fourth elements. The recommended light
sources are Dialight's 597 Series PLCC-2 or PLCC-4 Type SMT LEDs. The SMT LEDs are mounted in a straight line under
the rear of the part on a 5.08mm pitch. The light pipe material is water clear transmissive polycarbonate rated UL94-V0,
and has a 35% oxygen index.
Dialight can provide custom Optopipe
廬
solutions for your applications.
Dialight Corporation 鈥?1501 Route 34 South 鈥?Farmingdale, NJ 07727 鈥?TEL: (732) 919-3119 鈥?FAX: (732) 751-5778 鈥ww.dialight.com
1
