and the Flex 404 is a four zone FACP. These control pan-
commercial or institutional building.
power limited and operate in Style B (Class B). Each panel
mally-open contact devices. This includes System Sensor
3鈩?/div>
Series microprocessor-based detectors with advanced
features like drift compensation, maintenance alert and
freeze warning. (See Device Compatibility Document PN
52195 for a listing of compatible devices.)
Outputs include one notification appliance circuit (NAC) on
the Flex 402 and two NACs on the Flex 404. NACs are
power limited and operate in Style Y (Class B). Each FACP
has a Form-C Alarm and Trouble relay and 24 VDC special
applications resettable power. In addition, the Flex 404 has
a Form-C Supervisory relay and a special application non-
resettable power output. The FACP supervises wiring, AC
voltage and battery level.
Activation of a compatible smoke detector or any normally-
open fire alarm initiating device will activate audible and
visual signaling devices, illuminate an indicating LED,
sound the piezo sounder at the FACP, activate the FACP
alarm relay and operate and optional modules used to
notify a remote station or initiate an auxiliary control
function.
Both the Flex 402 and Flex 404 fire alarm control panels
are listed to UL
廬
Standard 864, 9th Edition.
Features
鈥?Flex 402: Two Style B (Class B) IDC zones, one Style Y
(Class B) NAC
鈥?Flex 404: Four Style B (Class B) IDC zones, two Style Y
(Class B) NACs
鈥?Optional NAC Class A converter module (Flex 404)
鈥?NAC synchronization and programmability features:
- ADA compliant strobe synchronization
- ANSI audible signals as required by NFPA 72
- Silence inhibit, auto-silence, non-silenceable
- Selective Silence: mute horns, keep strobes lit
- Temporal or steady signal
鈥?Silent or audible walk test from front keypad
鈥?Zone disable, alarm verification selectable per zone
鈥?Controls: Acknowledge, Alarm, Silence, Reset,
Walktest, Zone enable/disable
鈥?LED indicators: Alarm, Supervisory, Maintenance,
Trouble (one per zone): AC, NAC / Zone disable, NAC
fault, System / Power Trouble, Walktest, Alarm Silence,
Charger / Battery / Earth Fault (on pcb)
鈥?Alarm verification
鈥?Low AC voltage sense, automatic battery charger
鈥?Piezo sounder for alarm, trouble, and supervisory
An ISO 9000-2000 Company
SIGNALING
i
3鈩?/div>
is a trademark of Honeywell International Inc.
UL
廬
is a registered trademark of Underwriter鈥檚 Laboratories Inc.
MEA
Approve
d
S521 366-04-E 7165-1288:180
GAMEWELL-FCI
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
漏2007 by Honeywell International Inc. All rights reserved.
www.gamewell-fci.com
9021-60292 Rev. A page 1 of 2
12 Clintonville Road, Northford, CT 06472-1610 USA 鈥?Tel: (203) 484-7161 鈥?Fax: (203) 484-7118
1
2
