鈻?/div>
Designed for use in
HMI applications
*R
3590 - Precision Potentiometer
Electrical Characteristics
1
Standard Resistance Range........................................................................................200 to 100 K ohms
Total Resistance Tolerance................................................................................................................鹵5 %
Independent Linearity...................................................................................................................鹵0.25 %
Effective Electrical Angle ...............................................................................................3600 擄 +10 擄, -0 擄
Absolute Minimum Resistance .....................................1 ohm or 0.1 % maximum (whichever is greater)
Noise .................................................................................................................100 ohms ENR maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Sea Level ..............................................................................................................1,500 VAC minimum
Power Rating (Voltage Limited By Power Dissipation or 450 VAC, Whichever is Less)
+40 擄C ........................................................................................................................................2 watts
+125 擄C........................................................................................................................................0 watt
Insulation Resistance (500 VDC) ......................................................................1,000 megohms minimum
Resolution .............................................................................................See recommended part numbers
5.08 鹵 .38
(.200 鹵 .015)
5.08 鹵 .38
(.200 鹵 .015)
6.99 鹵 .38
(.275 鹵 .015)
1
2
3
10.31 + .00/- .13
(.406+.000/-.005)
BUSHING DIAMETER
(SEE PART NUMBERS)
.81
(.032)
SHAFT DIAMETER
(SEE PART NUMBERS)
.25
(.010)
7.92
(.312)
18.6 鹵 .4
(.732 鹵 .015)
STANDOFFS
15.54
R
(.612)
Environmental Characteristics
1
Operating Temperature Range .......................................................................................+1 擄C to +125 擄C
Storage Temperature Range .........................................................................................-55 擄C to +125 擄C
Temperature Coefficient Over Storage Temperature Range
2
...........................鹵50 ppm/擄C maximum/unit
Vibration..............................................................................................................................................15 G
Wiper Bounce ...............................................................................................0.1 millisecond maximum
Shock..................................................................................................................................................50 G
Wiper Bounce ...............................................................................................0.1 millisecond maximum
Load Life ...................................................................................................................1,000 hours, 2 watts
Total Resistance Shift...................................................................................................鹵2 % maximum
Rotational Life (No Load)................................................................................1,000,000 shaft revolutions
Total Resistance Shift...................................................................................................鹵5 % maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift...................................................................................................鹵2 % maximum
IP Rating
Sealed Versions (-3, -4, -7, and -8) ...............................................................................................IP 65
Unsealed Versions (-1 -2, -5, and -6) ............................................................................................IP 40
1.19 (PLASTIC VERSIONS)
(.047)
.81 鹵 .25
(METAL VERSIONS)
(.032 鹵 .010)
20.62 鹵 .81
(.812 鹵 .032)
12.2
(.48)
11.81
(.465)
22 鹵 .38 DIA.
(.875 鹵.015)
12.70
DIA.
(.500)
MOUNTING SURFACE
Mechanical Characteristics
1
Stop Strength .............................................................................................45 N-cm (64 oz.-in.) minimum
Mechanical Angle...........................................................................................................3600 擄 +10 擄, -0 擄
Torque (Starting & Running).................................................0.35 N-cm (0.5 oz.-in.) maximum (unsealed)
1.1 N-cm (1.5 oz.-in.) maximum (sealed)
Mounting ............................................................................................55-80 N-cm (5-7 lb.-in.) (plastic)
170-200 N-cm (15-18 in.-lb.) (metal)
Shaft Runout ......................................................................................................0.13 mm (0.005 in.) T.I.R.
Lateral Runout....................................................................................................0.20 mm (0.008 in.) T.I.R.
Shaft End Play ...................................................................................................0.25 mm (0.010 in.) T.I.R.
Shaft Radial Play................................................................................................0.13 mm (0.005 in.) T.I.R.
Pilot Diameter Runout........................................................................................0.08 mm (0.003 in.) T.I.R.
Backlash ............................................................................................................................1.0 擄 maximum
Weight ........................................................................................................................Approximately 19 G
Terminals ................................................................................................................Solder lugs or PC pins
Soldering Condition
Manual Soldering ..............................................................96.5Sn/3.0Ag/0.5Cu solid wire or no-clean
rosin cored wire; 370 擄C (700 擄F) max. for 3 seconds
Wave Soldering ........................96.5Sn/3.0Ag/0.5Cu solder with no-clean flux; 260 擄C (500 擄F) max.
for 5 seconds
Wash processes ......................................................................................................Not recommended
Marking......................................................Manufacturer鈥檚 name and part number, resistance value and
tolerance, linearity tolerance, wiring diagram, and date code.
Ganging (Multiple Section Potentiometers) .....................................................................1 cup maximum
Hardware...........................One lockwasher and one mounting nut is shipped with each potentiometer.
NOTE: For Anti-rotation pin add 91 after configuration dash number. Example: -2 becomes -291 to add AR pin.
RECOMMENDED PC BOARD MOUNTING HOLE LOCATIONS
HOLE DIAMETER
FMS
2.08
(.082)
CCW
CW
2
1
3
CW
5.08 5.08 6.99
(.200) (.200) (.275)
TOLERANCES: EXCEPT WHERE NOTED
.51
.13
DECIMALS: .XX 鹵
.XXX 鹵
(.02),
(.005)
FRACTIONS: 鹵1/64
MM
DIMENSIONS:
(IN.)
Recommended Part Numbers
Resistance
(鈩?
1,000
2,000
5,000
10,000
20,000
50,000
100,000
Resolution
(%)
.029
.023
.025
.020
.019
.013
.009
SHAFT & BUSHING CONFIGURATIONS
(Bushing - DxL, Shaft - D)
(-1) Plastic Bushing (3/8 鈥?x 5/16 鈥?
and Shaft (.2480 + .001, - .002)
(-2) Metal Bushing (3/8 x 5/16 )
and Shaft (.2497 + .0000, - .0009)
(-3) Sealed, Plastic Bushing (3/8 鈥?x 5/16 鈥?
and Shaft (.2480 + .001, - .002)
(-4) Sealed, Metal Bushing (3/8 鈥?x 5/16 鈥?
and Shaft (.2497 + .0000, - .0009)
(-5) Metric, Plastic Bushing (9 mm x 7.94 mm)
and Shaft (6 mm + 0, - .076 mm)
(-6) Metric, Metal Bushing (9 mm x 7.94 mm)
and Shaft (6 mm + 0, - .023 mm)
(-7) Metric, Sealed, Plastic Bushing (9 mm x
7.94 mm) and Shaft (6 mm + 0, - .076 mm)
(-8) Metric, Sealed, Metal Bushing (9 mm x
7.94 mm) and Shaft (6 mm + 0, - .023 mm)
(Printed Circuit)
3590P-2-102L
3590P-2-202L
3590P-2-502L
3590P-2-103L
3590P-2-203L
3590P-2-503L
3590P-2-104L
(Solder Lug)
3590S-2-102L
3590S-2-202L
3590S-2-502L
3590S-2-103L
3590S-2-203L
3590S-2-503L
3590S-2-104L
(Solder Lug)
3590S-1-102L
3590S-1-202L
3590S-1-502L
3590S-1-103L
3590S-1-203L
3590S-1-503L
3590S-1-104L
BOLDFACE
LISTINGS ARE IN STOCK AND READILY
AVAILABLE THROUGH DISTRIBUTION.
FOR OTHER OPTIONS CONSULT FACTORY.
TERMINALS:
L = RoHS COMPLIANT
BLANK = STANDARD
REV. 06/06
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
1
