BID
Tool
Type
DF3-DF4 Table Insulation
Displacement Machine
Part Number
SA701/DF3
903-4507-7
Objective Connector
DF3-*S-2R**
DF4-*P/PA-2R**
Remarks
Desk top machine
BPrecautions
1. Recommended
1.
Soldering Condition
Flow: 250莽 for 3 seconds
Manual soldering: 290莽 for 2 seconds
s
If the cable neighboring the connector is bent and unstraightened, secure a large bending radius because the
Jacket will be broken by the solder heat and the contact wire will be exposed.The Jacket in this part will be tore.
s
After the soldering process. If a stress is applied to the cable in the state where the connector and the
cable has heat inside, the Jacket hold area will be loosen. Therefore, carry out the post-soldering
operation after the connector has returned to the room temperature..
2. Cleaning Condition
Refer to Nylon Connector Use Hand book.
Don't use a solvent such ass trichloroethylene which invades the cable Jacket. In addition, avoid heat
cleaning by a solvent.
3. Connection Condition
Refer to the Nylon Connector Use Hand book.
B176