PCnet Family Network Driver Installation Guide
In the Network Drivers dialog box, select Setup.
In the AMD PCnet Family dialog box:
__9.1 For a PCnet-ISA adapter card:
Specify the IRQ, base I/O port, and DMA channel to correspond to
the jumper settings on the adapter card.
__9.2 For PCnet-ISA+, PCnet-ISA II, PCnet-32, and PCnet-PCI adapter
cards:
a. Set interrupt (IRQ) to Auto_scan and the base I/O port to 0.
b. Select OK. In the Network Drivers dialog box, select Close. In
the Network Setup dialog box, select OK. For the Microsoft-
specific dialog boxes, select Skip. For the Install Driver dialog
box, enter:
\WFW311
Note:
If Auto_scan is selected for PCnet-ISA+, PCnet-ISA II, PCnet-32, or
PCnet-PCI, then no value need be specified; however, Windows for
Workgroups 3.11 will issue a warning message regarding possible interrupt
conflict. This is due to the temporary configuring of the interrupt to channel
0 until the real value is set according to the EEPROM configuration.
__10 Select OK to exit. Windows for Workgroups 3.11 will ask the user to
reboot the machine once the installation is completed.
The installation of the NDIS 3.x driver for Windows for Workgroups 3.11 is now
complete.
7.1.2.1.
Keyword Example
To set the LED0 keyword value, follow the instructions given above to access the
advanced settings for a PCnet adapter card. A dialog box will appear to set the LED
keyword options. In the LED0 setting, enter the value desired from the list given in the
Software Keywords
section (Appendix B). See Table 4 for NDIS 3.x Driver Keywords.
84