PCnet Family Network Driver Installation Guide
install the AMD PCnet adapter card.
__7
In the AMD PCnet Family Ethernet Adapter Card Setup dialog box, select
bus type All (defaults to All if nothing is selected). If more than one
network adapter card is used, select its bus type.
Note:
Sometimes All will not work on PCI-based systems. In this case, try selecting
PCI1 or PCI2 depending on the bus type.
__7.1 For a PCnet-ISA adapter card:
Enter the correct I/O port, IRQ, and DMA channel values to
correspond with what is set on the card by jumpers. If no values are
selected, the default values will be chosen by the AMD driver.
__7.2 For PCnet-ISA+, PCnet-ISA II, PCnet-32, and PCnet-PCI adapter cards:
IRQ and DMA channel values are auto-detected. However, the
values must be specified for multiple network cards. The IRQ and
DMA values are set by using the AMINSTAL Utility (see the Express
Installation section for more details). Shutdown Windows NT and run
the AMINSTAL Utility from DOS.
Note:
If you are using a PCnet-PCI adapter card, you do not need to run the AMINSTAL
Utility.
__8
Reboot your system to complete the driver installation process.
For additional information, refer to your Microsoft Windows NT OS documentation.
In addition, the user may review the README.TXT file in the WINNT directory of
the AMD NDIS 3.x driver diskette.
7.1.1.1.
Keyword Example
To set the TP keyword, go into the AMD PCnet Family Ethernet Adapter Card
Setup dialog box (see instructions above on how to access this dialog box),
activate the TP button to use the TP keyword as described in the
Software
Keywords
section (Appendix B).
82