PCnet Family Network Driver Installation Guide
__10 A new window will then open entitled, Add Application: pnt. The following
message will be displayed:
PROCESSING:
Package:
Advanced Micro Devices PCnet Family driver (pnt)
from <diskette1>.
Wait for the system to process the AMD Unixware driver.
__11 Next, within the Add Application: pnt window, you will see the Adapter
Selection Menu with the following:
AMD PCnet (PNT): 0
Replace the 0 by typing:
1
The press <Enter>.
Note:
At this time AMD鈥檚 Unixware driver only supports one adapter.
The Apply box is then highlighted. Press <Enter> to continue.
__12 Next, within the Add Application: pnt window, you will see the PNT Parameter
Selection menu with the following:
Interrupt vector: 0
I/O address: 0 0
DMA: 0
If you are using a PCnet-ISA adapter card, then go to step 14.1 below. If you are
using a PCnet-ISA+, PCnet-ISA II, PCnet-32, or PCnet-PCI adapter card, then
go to step 12.2 below.
__12.1 For a PCnet-ISA adapter card:
a. You must know what your card鈥檚 IRQ (interrupt vector), I/O base
address, and DMA values are.
b. Use the right arrow key to select the appropriate IRQ value for your
card and then the down arrow key to move to the next field.
c. After filling in each field, press the down arrow key to highlight the
Apply box and then press <Enter>.
d. Go to step 13 below to continue.
106