DS1305
DS1305 BLOCK DIAGRAM
Figure 1
SIGNAL DESCRIPTIONS
V
CC1
- DC power is provided to the device on this pin. V
CC1
is the primary power supply.
V
CC2
- This is the secondary power supply pin. In systems using the trickle charger, the rechargeable
energy source is connected to this pin.
V
BAT
- Battery input for any standard 3-volt lithium cell or other energy source.
V
CCIF
(Interface Logic Power Supply Input)
- The V
CCIF
pin allows the DS1305 to drive SDO and
PF
out-put pins to a level that is compatible with the interface logic, thus allowing an easy interface to 3-volt
logic in mixed supply systems. This pin is physically connected to the source connection of the p-channel
transistors in the output buffers of the SDO and
PF
pins.
SERMODE (Serial Interface Mode Input)
-
The SERMODE
pin offers the flexibility to choose
between two serial interface modes. When connected to GND, standard 3-wire communication is
selected. When connected to V
CC
, Motorola SPI communication is selected.
SCLK (Serial Clock Input)
- SCLK is used to synchronize data movement on the serial interface for
either the SPI or 3-wire interface.
SDI (Serial Data Input)
- When SPI communication is selected, the SDI pin is the serial data input for
the SPI bus. When 3-wire communication is selected, this pin must be tied to the SDO pin (the SDI and
SDO pins function as a single I/O pin when tied together).
SDO (Serial Data Output)
- When SPI communication is selected, the SDO pin is the serial data output
for the SPI bus. When 3-wire communication is selected, this pin must be tied to the SDI pin (the SDI
and SDO pins function as a single I/O pin when tied together).
3 of 22