鈩?/div>
Nonvolatile Digital Potentiometer
FEATURES
DESCRIPTION
The X9241 integrates four nonvolatile E
2
POT digitally
controlled potentiometers on a monolithic CMOS micro-
circuit.
The X9241 contains four resistor arrays, each com-
posed of 63 resistive elements. Between each element
and at either end are tap points accessible to the wiper
elements. The position of the wiper element on the array
is controlled by the user through the two-wire serial bus
interface.
Each resistor array has associated with it a wiper counter
register and four 8-bit data registers that can be directly
written and read by the user. The contents of the wiper
counter register control the position of the wiper on the
resistor array.
The data register may be read or written by the user. The
contents of the data registers can be transferred to the
wiper counter register to position the wiper. The current
wiper position can be transferred to any one of its
associated data registers.
The arrays may be cascaded to form resistive elements
with 127, 190 or 253 taps.