廬
X80200, X80201, X80202, X80203, X80204
Data Sheet
January 21, 2005
FN8154.0
Power Supply Sequencer with Power-up
System Monitoring
The X80200 power sequencer provides a flexible approach
for handling difficult system power-up conditions. The
X80200 includes control of up to three voltage supplies and
can be cascaded to control additional supplies. The device
contains independent undervoltage lockout for each
controlled voltage.
The three voltage control circuits allow sequencing for
primary, core, and I/O voltages. The core and I/O supplies
are linked together with a comparator or a timer allowing a
tight coupling between these two supplies. The sequencing
may be either voltage based or time based.
The X80200 contains separate charge pumps to control
external N-channel power FETs for each of the supplies. The
charge pumps provide the high gate control voltage
necessary for efficient operation of the FET switches.
The X80200 turns on the primary voltage to the system
when the voltage source is steady. This primary FET switch
turn-on can be delayed with an external RC circuit. For the
secondary voltage sources, the device has a built-in 鈥渃ore-
up-first and core-down-last鈥?sequencing logic which is ideal
for high performance processors, DSPs and ASICs.
The serial bus can be used to monitor the status or turn off
each of the external power switches. The X80200 has 3
slave address bits that allow up to 8 devices to be connected
to the same bus.
Features
鈥?Sequence three voltage supplies independently
- Core and Logic I/O VCC power sequencer for processor
supplies
- Power up and power down control
- Voltage monitors have undervoltage lockout
- Internal charge pump drives external N-channel FET
switches
- Cascadable to sequence more than 3 supplies
- Time based or voltage based sequencing
鈥?Status register bits monitor gate output status
鈥?SMBus compatible Interface
鈥?Slave address identification for up to 8 power sequencers
(24 supplies) on the same bus
鈥?Surface mount 20-pin TSSOP Package
Applications
鈥?Distributed Power Supply Designs
鈥?Multi-voltage systems
鈥?Multiprocessor systems
鈥?Embedded Processor Applications
鈥?Digital Signal Processors, FPGAs, ASICs, Memory
Controllers
鈥?N + 1 Redundant Power Supplies
鈥?Support for SSI 鈥?Server System Infrastructure
Specifications
鈥?-48V Hotswap Power Backplane/Distribution
鈥?Card Insertion Detection and Power
Pinout
20 LD TSSOP
TOP VIEW
SETV
REF
A0
GND
A1
A2
NC
SDA
SCL
READY
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
VDDL
VDDM
VDDH
VFB
DNC
GATE_M
GATE_H
GATE_L
ENS
GATEH_EN
鈥?Power Sequencing DC-DC Supplies
鈥?Databus Power Interfacing
鈥?Custom Industrial Power Backplanes
鈥?Other: ATE, Data Acquisition, Mass Storage, Servers,
Data com, Wireless Basestations
Ordering Information
PART NUMBER
X80200V20I
X80201V20I
X80202V20I
X80203V20I
X80204V20I
UVLO
H
4.5
4.5
3.0
3.0
3.0
UVLO
M
3.0
2.25
2.25
2.25
0.9
UVLO
L
0.9
0.9
1.7
0.9
0.9
PACKAGE
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.