鈻?/div>
Low Latency Hi-Speed Receiver (43 Hi-Speed clocks
Max) allows use of legacy UTMI Links with a ULPI
wrapper.
Integrated Pull-up resistor on STP for interface
protection allows a reliable Link/PHY start-up with
slow Links (software configured for low power.)
Internal 1.8 volt regulators allow operation from a
single 3.3 volt supply.
Internal short circuit protection of ID, DP and DM
lines to VBUS or ground.
Integrated 24MHz Crystal Oscillator supports either
crystal operation or 24MHz external clock input.
Internal PLL for 480MHz Hi-Speed USB operation.
54.7mA Unconfigured Current (typical) - ideal for bus
powered applications.
83uA suspend current (typical) - ideal for battery
powered applications.
Full Commercial operating temperature range from
0C to +70C.
32 pin QFN package; green, lead-free (5 x 5 x 0.90
mm height)
SMSC USB3300
PRODUCT PREVIEW
Revision 1.02 (02-16-05)