TS4266G
Pin assignment:
1. Input
2. Inhibit
3. Output
4. Ground
Preliminary
150mA Ultra Low Drop Out Voltage Regulator with Inhibit
High Input Voltage up to 45V
Low Dropout Voltage 0.5V (max)
Low Power Consumption 40uA (typ)
General Description
TS4266G is a 5V low-drop fixed-voltage regulator in an SOT-223-4L package. It can be switched ON and OFF by the
Inhibit pin. It is functional and pin compatible to the TS4266, but with a reduced quiescent current of <1uA in OFF mode
and 40uA in ON mode. The TS4266G is especially designed for all applications that require very low quiescent current
in ON and OFF mode. It is designed to supply microprocessor systems under the sever condition of automotive
applications and therefore it is equipped with additional protection against over load, short circuit and over temperature.
TS4266G also can be used in other applications, where a stabilized voltage and the inhibit feature is required. The IC
regulates an input voltage in the range of 5.5V < Vin < 45V to Vout(rated) = 5.0V. The maximum output current is more
than 150mA. This IC is regulated at the inhibit pin pull high level voltage.
Features
Fixed output voltage 5V
Output voltage tolerance +/-3 %
150mA current capability
Ultra low drop out voltage
Very low current consumption 40uA (typ)
Over temperature protection
Short-circuit proof
Reverse polarity proof
Wide temperature range
Suitable for use in automotive electronics
Inhibit control
Ordering Information
Part No.
TS4266GCW450
Operating Temp.
-40 ~ 150
o
C
Package
SOT-223-4L
Pin Definition and Function
Pin
1
2
3
4
Symbol
Input
Inhibit
Output
Ground
Function
Block to ground directly on IC with
ceramic capacitor
Inhibit input, high level turn IC on
Block to ground with 10uF capacitor,
ESR < 4鈩?/div>
Ground
Block Diagram
TS4266G Preliminary
1-1
2004/12 rev. A
1
2
3
4
