鈻?/div>
Fully compliant with:
Universal Serial Bus Specification Revision
2.0, On-The-Go Supplement to the USB 2.0
Spec. Rev. 1.0a, UTMI+ Low Pin Interface
transceiver specification 1.1
Fully compliant with ULPI 1.1 register set
Supports high-speed (480 Mbit/s), full-speed
(12 Mbit/s) and low-speed (1.5 Mbit/s) modes
of operation
Integrated HS termination and FS/LS/OTG
pull-up/ pull-down resistors
Supports both single (SDR) and Dual-edge
data rate (DDR) on ULPI interface
Supports Session Request Protocol (SRP) and
Host Negotiation Protocol (HNP) for dual-role-
device features
Ability to control ext. charge pump for higher
V
BUS
currents
External square wave clock with 1V8VIO
amplitude must be applied to oscillator input XI
On request 19.2 MHz or 26 MHz oscillator
frequency, external crystal version, can be
provided
Supports 2.7 V UART mode
Single supply, +3 V to +4.5 V voltage range
Integrated dual voltage regulator to supply
internal circuits with stable 3.3 V and 1.2 V
Integrated over current detector
Integrated USB2.0 摟7.1.1 "Short Circuit
Withstand" protection
Power down mode with very low power
consumption for battery-powered devices
-40擄C to 85擄C operating temperature range
Available in 碌TFBGA36 RoHS package
碌TFBGA36
Lead-free Package
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
Applications
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
Mobile phones
PDAs
MP3 players
Digital still cameras
Video camera
Printer
Navigation system
Set top box
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
鈻?/div>
Description
The STULPI01 is a high-speed ULPI (UTMI+ Low
Pin Interface), USB OTG transceiver which
provides complete physical layer solution for any
high speed USB host, device or OTG dual role
core. It allows USB ASICs to interface with the
physical layer of the USB through 12-pin or 8-pin
interface. It contains V
BUS
comparators, ID line
detector, complete ULPI register map and
interrupt generator, and the USB differential driver
and receivers. The STULPI01 transceiver is
suitable for mobile applications and battery
powered devices thanks to its low power
consumption and power down operating mode.
August 2007
Rev. 1
1/6
www.st.com
6
For further information contact your local STMicroelectronics sales office.
STULPI01ATBR 產品屬性
0現貨
在售
-
卷帶（TR）
在售
收發器
USB
1/1
-
-
-
3V ~ 4.5V
-40°C ~ 85°C
表面貼裝型
36-TFBGA
36-uTFBGA（3.6x3.6）
STULPI01ATBR相關型號PDF文件下載
-
型號
版本
描述
廠商
下載
-
英文版
Voltage-Controlled Oscillator
ETC
-
英文版
Voltage-Controlled Oscillator
ETC
-
英文版
HS USB ULPI transceiver
-
英文版
HS USB ULPI transceiver
-
英文版
High speed USB On-The-Go ULPI transceiver
-
英文版
HS USB ULPI transceiver
-
英文版
HS USB ULPI transceiver
STMICROELECTRONICS
1
2
3
4
5
6
