(STF203-33). The 1.5k
鈩?/div>
pull-up resistor is required by the USB specification to
identify the equipment as either a full-speed
(connected to D+ line) or low-speed (connected to D-
line) device. The 47pF capacitors are required to
bypass high frequency energy to ground and to control
the edge rate of the USB signals. The TVS diodes
provide ESD protection of both (D+ & D-) data lines
and the voltage bus (V
BUS
). The TVS diodes on the
input/output pins provide suppression of ESD voltages
in excess of 15kV (air discharge) and 8kV (contact
discharge) per IEC 61000-4-2, level 4. The TVS diode
on the V
BUS
pin will suppress ESD discharges in excess
of 25kV per IEC 61000-4-2.
STF203-15 THRU STF203-33
Features
K
Bidirectional EMI/RFI filtering and line termination
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
with integrated ESD protection
ESD protection for USB power (V
BUS
) and data lines
(D+ & D-) to
IEC 61000-4-2 Level 4
Filtering and termination for one USB port
Series resistors: 15鈩? 22鈩? and 33鈩?/div>
Low TVS operating voltage (5.25V)
Low leakage current
Small SC70-6L package
Solid-state technology
Mechanical Characteristics
EIAJ SC70-6L package
Molding compound flammability rating: UL 94V-0
Marking : Marking Code
Packaging : Tape and Reel per EIA 481
Applications
USB Ports
Cellular Handsets
PDA
Pagers
Digital Cameras
PC Peripherals
MP3 Players
Circuit Diagram
6
.
Schematic & PIN Configuration
1
D In/Out
D In/Out
2
5
4
3
D In/Out
D In/Out
SC70-6L (Top View)
Revision 05/30/2002
1
www.semtech.com
next