ST485E
鹵15KV
ESD PROTECTED, LOW POWER
RS-485/RS-422 TRANSCEIVER
s
s
s
s
s
s
s
s
s
s
LOW QUIESCENT CURRENT: 300碌A(chǔ)
DESIGNED FOR RS-485 INTERFACE
APPLICATIONS
-7V TO 12V COMMON MODE INPUT
VOLTAGE RANGE
DRIVER MAINTAINS HIGH IMPEDANCE IN
3-STATE OR WITH THE POWER OFF
70mV TYPICAL INPUT HYSTERESIS
30ns PROPAGATION DELAYS, 5ns SKEW
OPERATE FROM A SINGLE 5V SUPPLY
CURRENT LIMITING AND THERMAL
SHUTDOWN FOR DRIVER OVERLOAD
PROTECTION
ESD PROTECTION:
鹵15KV
(H.B.M.)
鹵8KV
(IEC-1000-4-2 CONTACT
DISCHARGE)
ALLOWS UP TO 64 TRANSCEIVERS ON
THE BUS
DIP
SOP
DESCRIPTION
The ST485E is al low power transceiver for
RS-485 and RS-422 communication. Each driver
output and receiver input is protected against
鹵15KV
electrostatic discharge (H.B.M.) (ESD)
shocks, without latcup. These parts contain one
ORDERING CODES
Type
ST485ECN
ST485EBN
ST485EXN
ST485ECD
ST485EBD
ST485EXD
ST485ECDR
ST485EBDR
ST485EXDR
Temperature
Range
0 to 70 擄C
-40 to 85 擄C
-55 to 125 擄C
0 to 70 擄C
-40 to 85 擄C
-55 to 125 擄C
0 to 70 擄C
-40 to 85 擄C
-55 to 125 擄C
Package
driver and one receiver in half duplex
configuration.
This transceiver draw 300碌A(chǔ) (typ.) of supply
current when unloaded or fully loaded with
disabled drivers.
It operates from a single 5V supply.
Driver is short-circuit current limited and is
protected against excessive power dissipation by
thermal shutdown circuitry that place the driver
outputs into a high-impedance state.
The ST485E is designed for bi-directional data
communications on multipoint bus transmission
line (half-duplex applications).
Comments
50parts per tube / 40tube per box
50parts per tube / 40tube per box
50parts per tube / 40tube per box
100parts per tube / 20tube per box
100parts per tube / 20tube per box
100parts per tube / 20tube per box
2500 parts per reel
2500 parts per reel
2500 parts per reel
DIP-8
DIP-8
DIP-8
SO-8 (Tube)
SO-8 (Tube)
SO-8 (Tube)
SO-8 (Tape & Reel)
SO-8 (Tape & Reel)
SO-8 (Tape & Reel)
September 2003
1/13