SPL10A1
7.5KB LCD CONTROLLER/DRIVER
GENERAL DESCRIPTION
The SPL10A1 is a CMOS 8-bit single chip micro-controller which contains LCD drivers,
ROM, SRAM, I/O, timer/counter and audio output on a single chip.
The SPL10A1 is designed to drive LCD directly and perform efficient controller function
as well as arithmetic function. With the on chip crystal oscillator, the clock function is
easily realized. For power saving, a software controllable standby switch is also built-in.
The SPL10A1 is widely used in electronic products requiring very low power operation, for
example, multi-function watch, calendar, calculator, thermometer or LCD game with audio
output.
FEATURES
卯
CPU: 8-bit SUNPLUS RISC CPU
卯
Operating voltage
:
2.4V to 5.5V
卯
Maximum CPU clock: 2 MHz @ 3V
卯
ROM capacity: 7.5 K x 8 bits
卯
RAM capacity: 96 x 8 bits
卯
Direct Driver for LCD : 4 Commons X 32 Segments
(1/2, 1/3 bias, 1/2, 1/3, 1/4 duty)
卯
Input Port : 6 input pins with key wakeup function
with 4 different configurations (mask option)
卯
I/O Port : 2 general I/O pins and 4 special I/O pins
that can implement thermometer and..
卯
Timer/Counter: one 12-bit timer/counter
卯
6 Interrupt sources : External Interrupt
Timer Interrupt
2 KHz Interrupt
LCD Service Interrupt (in LCD share mode)
128 Hz Interrupt
2 Hz Interrupt
卯
Dual Clock System : One built-in RC oscillator (only one resistor is needed)
for CPU and one built-in crystal oscillator or RC
oscillator ( mask option ) for LCD scanning.
卯
Audio or Tone Output : One 7-bit DA single tone melody or speech that can
drive transistor or Tone output that can drive buzzer.
卯
Low Operating Current : Typical current < 3
碌A(chǔ)
@ 3V for timepiece product
漏
Sunplus Technology Co., Ltd.
1
Rev. : 1.1
1998.07.19