鈥?/div>
Very low dropout voltage: 100mV
Accurate current regulation down to
dropout voltage
No external components
Output current 2 levels selectable
Power-saving shutdown mode of
12nA typical
PWM brightness control
Fast turn-on (<50碌S)
Time Out function to protect the LED
Thermal Shutdown Protection
Space saving 2mm x 3mm 8 pin DFN
package
The
SP7619 Evaluation Board
is designed to help the user evaluate the performance of the SP7619 for
use as a single LED Driver. The evaluation board is a completely assembled and tested surface mount
board which provides easy probe access points to all SP7619 inputs and outputs so that the user can
quickly connect and measure electrical characteristics and waveforms. The Evaluation Board schematic
diagram is shown at Figure 1.
DESCRIPTION AND BOARD SCHEMATIC
Figure 1.The SP7619 Evaluation Board Schematic Diagram
*Note: While high current time duration is limited by the SP7619 in the range from 2 to 7s, we don鈥檛
recommend pushing the button for a long time to prevent LED damage and battery discharge. LEDs
provide very bright light at 0.5/0.7A output current. Protect your eyes.
Dec 7-06
SP7619 Evaluation Board Manual
Page 1 of 4
漏 2006 Sipex Corporation