廬
SP504
Application Note
routers. These multi-protocol systems will usu-
ally contain multiple ports to accommodate the
different interfaces. The
SP504
can support all
the ports through software and provide conve-
nient DTE or DCE functionality to the port. DTE
and DCE configuration is provided on the next
page and also in the
SP504
data sheet.
The designer can evaluate the
SP504
with
our
SP504 Evaluation Board.
This evaluation
board basically allows the user to access the
pins directly through probe points on the board.
The designer can also access the device by
software through the three serial port connec-
tors on the board. Details on the evaluation
board can be found in the
SP504
data sheet.
The introduction of our SP502 transceiver paved
the way for a new generation of multi-mode
transceivers that are being designed into next
generation networking products. The
SP504
multi-mode transceiver is the latest member of
the family and offers: reduced external V.35
termination; V.36 & EIA-530A modes; and
receiver tri-state and fail-safe ability.
As with the SP502 and SP503, the
SP504
can be
programmed via software to the different avail-
able physical protocols and is also drop-in com-
patible with its predecessors.
The versatility of the
SP504
is ideal for multi-
protocol applications such as Frame Relay sys-
tems, X.25 routers/switches and multi-protocol
PCs
Workstations
PCs
Workstations
Mainframe
Branch Office
Remote Office
Multi-
Protocol
Router
2.1Mb/s
Frame
Relay
Switch
Frame
Relay
56/64kb/s
1.5Mb/s
X.25
Switch
56kb/s
FRAD
&
X.25
Switch
Engineering/Manufacturing
Corporate Office
Workstations
Mainframe
Workstation
Workstation
PC
PCs
Mainframe
PC
Typical Environment Using Frame Relay and X.25 Systems
SP504AN
SP504 Application Note
漏 Copyright 2000 Sipex Corporation
1