鈼?/div>
Protections: Short Circuit /Overload /Over Voltage /Over Temperature
SPECIFICATIONS:
PSMPS30 Series
All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
88 鈥?264VAC auto switch (127 鈥?370VDC)
Input Frequency
47 to 63Hz
AC Current (typical)
0.8A @ 115VAC / 0.5A @ 230VAC
Inrush Current
30A @ 230VAC cold start
Leakage Current
Less than 0.3mA @ 264VAC
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Voltage Tolerance
鹵3% for all models except PSMPS-30-48 (鹵2%)
Output Power
See Table
Line Regulation
鹵1% max.
Load Regulation
鹵1% for all models except PSMPS-30-5 (鹵2%)
Output Current
See Table
Ripple & Noise (20MHz BW)
See Table
Setup, Rise Time
500ms and 30ms @ 230VAC and full load / 500ms and 30ms @ 115VAC and full load
Hold-Up Time
70ms @ 230VAC and full load / 12 ms @ 115VAC and full load.
Temperature Coefficient
鹵0.03%/擄C (0~50擄C)
PROTECTION
Over Voltage Protection
Protection Type: Shutdown output voltage, re-power on to recover
Above 105% rated output power.
Overload Protection
Protection Type: Hiccup mode, recovers automatically after fault condition is removed.
Protection Type: Shutdown output voltage, recovers automatically after temperature goes down.
Over Temperature Protection
Tj 135擄C typically (U1) Detect on main control IC.
GENERAL SPECIFICATIONS
Switching Frequency (fixed)
100KHz
Efficiency
See Table
Isolation Voltage
4000VAC (Input to Output), 1500VAC (Input to FG), SHORT (Output to FG)
Isolation Resistance
100M鈩?/ 500VDC (Input to Output), 100M鈩?/ 500VDC (Input to FG)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
-10擄C to +60擄C (refer to derating curve)
Storage Temperature
-20擄C to +85擄C
Operating Humidity (non-condensing)
20% to 90% RH
Storage Humidity (non-condensing)
10% to 95% RH
Vibration
10~500Hz, 2G 10min./1cycle, Period for 60 minutes each along X, Y, and Z axes.
MTBF
547,000 hours min. (According to MIL-HDBK-217) at 25擄C
PHYSICAL SPECIFICATIONS
Weight
150g
Dimensions
101.6(L) x 65.8(W) x 23.5(H) mm
SAFETY & EMC
Safety Standards
UL2601-1, TUV EN60601-1, IEC601-1 Approved
EMI Conduction & Radiation
Compliance to EN55011 (CISPR11) Class B
Harmonic Current
Compliance to EN61000-3-2,-3
EMS Immunity
Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN60601-1-2, Medical level, criteria A
o
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
1
2
3
