bridged audio power amplifiers capable of producing 2 W into 3鈩?/div>
with a 5V supply voltage or 800mW into 3鈩?with a 3.3V supply
voltage .The UTC
PA0202
simplifies design and frees up board
space for other features. Both of the depop circuitry and the
thermal shutdown protection circuitry are integrated in UTC
PA0202,
that reduce clicks and pops noise during power up or
shutdown mode operation.
A MUX control terminal (HP/LINE) allows selection between the
two sets of stereo input signals. To simplify the audio system
design, UTC
PA0202
combines a stereo bridge-tied loads
(BTL)mode for speaker drive and a stereo single-end (SE)mode for
headphone drive into a single chip, where both modes are easily
switched by the SE/BTL input control pin signal.
CMOS IC
HTSSOP-24
*Pb-free plating product number: PA0202L
FEATURES
* Improves depop circuitry to eliminate turn-on and turn-off
transients in output
* Output power:
-2W(typ.)@5V into 3鈩?with 0.2% THD+N max (1kHz)
-800mW(typ.)@3.3V into 3鈩?with 0.2% THD+N max (1kHz)
* Fully specified for use with 3-鈩?Loads
* Stereo switchable bridged/single-ended power amplifiers
* Input MUX select terminal
* Thermal-shutdown protection
* Shutdown mode available
ORDERING INFORMATION
Order Number
Normal
Lead Free Plating
PA0202-N24-R
PA0202L-N24-R
PA0202-N24-T
PA0202L-N24-T
Package
HTSSOP-24
HTSSOP-24
Packing
Tape Reel
Tube
PA0202L-N24-R
(1)Packing Type
(2)Package Type
(3)Lead Plating
(1) R: Tape Reel, T: Tube
(2) N24: HTSSOP-24
(3) L: Lead Free Plating, Blank: Pb/Sn
www.unisonic.com.tw
Copyright 漏 2005 Unisonic Technologies Co., Ltd
1 of 11
QW-R502-106,A