鈥?/div>
128Mb x16
SDRAM Addendum
SYNCHRONOUS
DRAM
FEATURES
鈥?Supports PC100 and PC133 functionality
鈥?Fully synchronous; all signals registered on positive
edge of system clock
鈥?Internal pipelined operation; column address can
be changed every clock cycle
鈥?Internal banks for hiding row access/precharge
鈥?Programmable burst lengths: 1, 2, 4, 8, or full page
鈥?Auto Precharge, includes CONCURRENT AUTO
PRECHARGE, and Auto Refresh Modes
鈥?Self Refresh Mode; standard and low power
鈥?LVTTL-compatible inputs and outputs
鈥?Single +3.3V 鹵0.3V power supply
鈥?64ms, 4,096-cycle refresh
MT48LC8M16A2 鈥?2 MEG X 16 X 4 BANKS
For the latest data sheet, please refer to the Micron Web
site: www.micron.com/dramds
ADDENDUM CHANGES
The standard 128Mb SDRAM data sheets also per-
tain to the x16 device and should be referenced for a
complete description of SDRAM functionality and
operating modes. However, to meet the faster speed
grades, some of the AC timing parameters are slightly
different. This addendum data sheet will concentrate
on the key differences required to support the
enhanced speeds.
The Micron 128Mb data sheet provides full specifi-
cations and functionality unless specified herein.
8 MEG X 16
Configuration
Refresh Count
Row Addressing
Bank Addressing
Column Addressing
2 Meg x 16 x 4 banks
4K
4K (A0鈥揂11)
4 (BA0, BA1)
512 (A0鈥揂8)
OPTION
鈥?Configuration
8 Meg x 16 (2 Meg x 16 x 4 banks)
WRITE Recovery (
t
WR)
t
WR = 鈥? CLK鈥?/div>
1
鈥?Package
Plastic Package 鈥?OCPL
2
54-pin TSOP II (400 mil)
鈥?Timing (Cycle Time)
6.0ns @ CL = 3
鈥?Self Refresh
Standard
鈥?Operating Temperature Range
Commercial (0
o
C to +70
o
C)
NOTE:
1. Refer to Micron Technical Note: TN-48-05.
2. Off-center parting line.
MARKING
8M16
A2
KEY TIMING PARAMETERS
TG
-6A
None
None
SPEED
GRADE
-6A
CLOCK
FREQUENCY
167 MHz
ACCESS
TIME
CL = 3*
5.4ns
SETUP
TIME
1.5ns
HOLD
TIME
0.8ns
Part Number:
MT48LC8M16A2TG-6A
x16 Addendum
MT48lc8m16a2_addendum.fm - Rev. 7/02
1
Micron Technology, Inc., reserves the right to change products or specifications without notice.
漏2002, Micron Technology Inc.
鈥?/div>
PRODUCTS
AND SPECIFICATIONS DISCUSSED HEREIN ARE FOR EVALUATION AND REFERENCE PURPOSES ONLY AND ARE SUBJECT TO CHANGE BY
MICRON WITHOUT NOTICE. PRODUCTS ARE ONLY WARRANTED BY MICRON TO MEET MICRON鈥橲 PRODUCTION DATA SHEET SPECIFICATIONS.
1
2
3
4
