錚?/div>
LX24T3/956/A4 is a dielectric barrier discharge lamp system. It consists of an aperture lamp
and an inverter. It is especially used for the exposure process in digital copiers and scanners. The lamp provides
an illuminance of 48,000 lux in white (triphosphor). The Xenon gas discharge enables instant light within a few
milliseconds. The light output shows no temperature dependence as well as a steady light emission. Since OSRAM
patented internal electrodes are used no high voltage isolation is needed.
15
2
8
11.5
3.1
13
13
235
15
2
75擄
5
Lamp technical data
1
Order reference
System power consumption
Lamp operating frequency
Rated lamp voltage
2
Illuminance
2
Color coordinates : x / y
Maintenance >80%
Lamp weight
Cable length
1
2
LX24T3/956/A4
W
24
KHz > 80
KV < 3
Lx
48,000
0.324 / 0.336
Hrs. 1000
g
24
mm 230
Lamp overall length Lo
Inner emission length Li
80% of center illuminance
Outer diameter base D
Outer diameter glass tube
Aperture
偽
mm
mm
mm
mm
mm
deg.
267,5
180
10.0
75
ambient room temperature of 25擄C
Note: lamp base design on customer request possible
measured at a distance of 8mm from the aperture by Minolta T-1M
DC-HV inverter technical data
1
Order reference
Inverter size
Inverter weight
Nominal/Min./Max. input voltage
Nominal/Maximum input current
Typical input inrush current
3
3
switch on by lamp enable
Mm
G
Vdc
A
A
QT LINEX
錚?/div>
1x24/24
135 (L) x 40 (W) x 28 (H)
110
24 / 21.6 / 26.4
1.0 / 1.1
2
The inverter provides an electrical pulse wave to the lamp.
The lamp system is covered by one or more of the following patents:
WO 94/23442, WO 98/49712. Other patents not listed may apply or pending.
Photo Optics Berlin
1
2
