鈥?/div>
Portable tools
Models Available
Specifications
Materials
HOUSING: 6/6 nylon (UL94V-2), black.
ACTUATOR: Glass filled acetal, UV and petroleum resistant,
black.
CONTACTS: Q contact material: Copper, silver plated. See page
I-27 for additional contact materials.
TERMINALS: Q contact material: Copper, silver plated. See page
I-27 for additional contact materials.
CONTACT SPRING: Music wire or stainless steel.
TERMINAL SEAL: Epoxy.
J
Slide
CONTACT RATING: Q contact material (LP0X, LP2X Models: 6 AMPS
@ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC (UL/CSA).
(LP7X, LP8X Models): 11 AMPS @ 125/250 V AC (UL/CSA).
See page I-27 for additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
INSULATION RESISTANCE: 109
鈩?/div>
min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
CONTACT RESISTANCE: Below 10 m
鈩?/div>
typ. initial
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
OPERATING TEMPERATURE: -30潞C to +65潞C
STORAGE TEMPERATURE: -30潞C to +85潞C
NOTE:
Any models supplied with Q, B or G contact material are RoHS compliant. For the lat-
est information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE:
Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J鈥?5 and J鈥?6. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
LP22
DPDT, 6 AMP
LP02
SPDT, 6 AMP
LP81
DPST, 11 AMP
LP82
DPDT, 11 AMP
Actuator
C2
Black cap
C1
Whitecap
C3
Red cap
Detent
1
With detent
Mounting Style
T2
Snap-in panel with tabs
(D, L, N markings only)
Terminations
03
Solder lug with hole
Housing Markings
NONE
No markings
D
ON-OFF
Contact Material
Q
Silver
B
Gold
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J鈥?4
www.ittcannon.com
1
2
3
