LD1085C
SERIES
3A LOW DROP POSITIVE VOLTAGE
REGULATOR ADJUSTABLE AND FIXED
s
s
s
s
s
s
s
s
TYPICAL DROPOUT 1.3V (AT 3A)
THREE TERMINAL ADJUSTABLE OR FIXED
OUTPUT VOLTAGE 1.5V, 1.8V, 2.5V, 2.85V,
3.3V, 3.6V, 5V, 8V, 9V, 12V.
GUARANTEED OUTPUT CURRENT UP TO
3A
OUPUT TOLERANCE
鹵2%
AT 25擄C AND
鹵3%
IN FULL TEMPERATURE RANGE
INTERNAL POWER AND THERMAL LIMIT
WIDE OPERATING TEMPERATURE RANGE
-40擄C TO 125擄C
PACKAGE AVAILABLE : DPAK
PINOUT COMPATIBILITY WITH STANDARD
ADJUSTABLE VREG
DPAK
DESCRIPTION
The LD1085 is a LOW DROP Voltage Regulator
able to provide up to 3A of Output Current.
Dropout is guaranteed at a maximum of 1.5V at
the maximum output current, decreasing at lower
loads. The LD1085 is pin to pin compatible with
the older 3-terminal adjustable regulators, but has
better performances in term of drop and output
tolerance .
A 2.85V output version is suitable for SCSI-2
active termination. Unlike PNP regulators, where
a part of the output current is wasted as quiescent
current, the LD1085 quiescent current flows into
the load, so increase efficiency. Only a 10碌F
minimum capacitor is need for stability.
The device is supplied in DPAK. On chip trimming
allows the regulator to reach a very tight output
voltage tolerance, within 鹵2% at 25擄C.
SCHEMATIC DIAGRAM
July 2002
1/15