廬
ISL6566A
Data Sheet
July 27, 2005
FN9200.2
Three-Phase Buck PWM Controller with
Two Integrated MOSFET Drivers and One
External Driver Signal
The ISL6566A three-phase PWM control IC provides a
precision voltage regulation system for advanced
microprocessors. The integration of power MOSFET drivers
into the controller IC marks a departure from the separate
PWM controller and driver configuration of previous multi-
phase product families. By reducing the number of external
parts, this integration is optimized for a cost and space
saving power management solution.
Outstanding features of this controller IC include programmable
VID codes compatible with Intel VRM9, VRM10, as well as
AMD Hammer microprocessors. A unity gain, differential
amplifier is provided for remote voltage sensing, compensating
for any potential difference between remote and local grounds.
The output voltage can also be positively or negatively offset
through the use of a single external resistor.
A unique feature of the ISL6566A is the combined use of
both DCR and r
DS(ON)
current sensing. Load line voltage
positioning (droop) and overcurrent protection are
accomplished through continuous inductor DCR current
sensing, while r
DS(ON)
current sensing is used for accurate
channel-current balance. Using both methods of current
sampling utilizes the best advantages of each technique.
Protection features of this controller IC include a set of
sophisticated overvoltage, undervoltage, and overcurrent
protection. Overvoltage results in the converter turning the
lower MOSFETs ON to clamp the rising output voltage and
protect the microprocessor. The overcurrent protection level is
set through a single external resistor. Furthermore, the
ISL6566A includes protection against an open circuit on the
remote sensing inputs. Combined, these features provide
advanced protection for the microprocessor and power system.
Features
鈥?Integrated Multi-Phase Power Conversion
- 1 or 2-Phase Operation with Internal Drivers
- 3-Phase Operation with External PWM Driver Signal
鈥?Precision Core Voltage Regulation
- Differential Remote Voltage Sensing
-
鹵0.5%
System Accuracy Over Temperature
- Adjustable Reference-Voltage Offset
鈥?Precision Channel Current Sharing
- Uses Loss-Less r
DS(ON)
Current Sampling
鈥?Accurate Load Line Programming
- Uses Loss-Less Inductor DCR Current Sampling
鈥?Variable Gate Drive Bias: 5V to 12V
鈥?Microprocessor Voltage Identification Inputs
- Up to a 6-Bit DAC
- Selectable between Intel鈥檚 VRM9, VRM10, or AMD
Hammer DAC codes
- Dynamic VID-on-the-fly Technology
鈥?Multi-tiered Overvoltage and Overcurrent Protection
鈥?Digital Soft-Start
鈥?Selectable Operation Frequency up to 1.5MHz Per Phase
鈥?Pb-Free Plus Anneal Available (RoHS Compliant)
Pinout
ISL6566A (QFN)
TOP VIEW
UGATE1
31
30 BOOT1
29 PHASE1
28 NC
27 PWM3
41
GND
26 NC
25 ISEN3
24 EN_PH3
23 NC
22 PHASE2
21 BOOT2
11
RGND
12
VSEN
13
OCSET
14
ICOMP
15
ISUM
16
IREF
17
LGATE2
18
PVCC2
19
ISEN2
20
UGATE2
LGATE1
PGOOD
PVCC1
33
ISEN1
32
ENLL
37
VID2
VID3
VID4
40
VID1
1
2
3
4
5
6
7
8
9
39
38
FS
36
35
34
Ordering Information
PART NUMBER*
ISL6566ACR
ISL6566ACRZ (Note)
ISL6566ACRZA (Note)
ISL6566AIR
ISL6566AIRZ (Note)
ISL6566AIRZA (Note)
TEMP.
(擄C)
0 to 70
0 to 70
0 to 70
PACKAGE
40 Ld 6x6 QFN
PKG.
DWG. #
L40.6x6
VID0
VID12.5
VRM10
REF
OFS
VCC
COMP
FB
40 Ld 6x6 QFN (Pb-free) L40.6x6
40 Ld 6x6 QFN (Pb-free) L40.6x6
L40.6x6
-40 to 85 40 Ld 6x6 QFN
-40 to 85 40 Ld 6x6 QFN (Pb-free) L40.6x6
-40 to 85 40 Ld 6x6 QFN (Pb-free) L40.6x6
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020
*Add 鈥?T鈥?suffix for tape and reel.
VDIFF 10
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or1-888-468-3774
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.