廬
ISL59530
Data Sheet
June 12, 2006
FN6220.1
16x16 Video Crosspoint
The ISL59530 is a 300MHz 16x16 Video Crosspoint Switch.
Each input has an integrated DC-restore clamp and an input
buffer. Each output has a fast On-Screen Display (OSD)
switch (for inserting graphics or other video) and an output
buffer. The switch is non-blocking, so any combination of
inputs to outputs can be chosen, including one channel
driving multiple outputs. The Broadcast Mode directs one
input to all 16 outputs. The output buffers can be individually
controlled through the SPI interface, the gain can be
programmed to x1 or x2, and each output can be placed into
a high impedance mode.
The ISL59530 offers a typical -3dB signal bandwidth of
300MHz. Differential gain of 0.025% and differential phase of
0.05擄, along with 0.1dB flatness out to 50MHz, make the
ISL59530 suitable for many video applications.
The switch matrix configuration and output buffer gain are
programmed through an SPI/QSPI鈩?compatible three-wire
serial interface. The ISL59530 interface is designed to
facilitate both fast updates and initialization. On power-up, all
outputs are high impedance to avoid output conflicts.
The ISL59530 is available in a 356 ball BGA package and
specified over an extended -40擄C to +85擄C temperature range.
The single-supply ISL59530 can accommodate input signals
from 0V to 3.5V and output voltages from 0V to 3.8V. Each
input includes a clamp circuit that restores the input level to
an externally applied reference in AC-coupled applications.
The ISL59531 is a fully differential input version of this device.
Features
鈥?16x16 non-blocking switch with buffered inputs and outputs
鈥?300MHz typical bandwidth
鈥?0.025%/0.05擄 dG/dP
鈥?Output gain switchable x1 or x2 for each channel
鈥?Individual outputs can be put in a high impedance state
鈥?-90dB Isolation at 6MHz
鈥?SPI digital interface
鈥?Single +5V supply operation
鈥?Pb-free plus anneal available (RoHS compliant)
Applications
鈥?Security camera switching
鈥?RGB routing
鈥?HDTV routing
Ordering Information
PART NUMBER
ISL59530IKZ (Note)
TAPE &
REEL
-
PACKAGE
PKG.
DWG. #
356 Ld PBGA (Pb-free) V356.27x27
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte
tin plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Block Diagram
VS+ VOVERn OVERn
16
OVERLAY
INPUT
16
LOGIC
CONTROL
VREF
-
+
2uA
Power-on
16 INPUTS
Clamp
Enable
SWITCH
MATRIX
16 OUTPUTS
-
+
2uA
Av
x1, x2
Output
Enable
Power-on
SDI
SCLK
SLATCH
SPI INTERFACE, REGISTER
SDO
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright 漏 Intersil Americas Inc. 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.