Previous Datasheet
Index
Next Data Sheet
Data Sheet No. PD-6.033E
IR2132
3-PHASE BRIDGE DRIVER
Features
n
Floating channel designed for bootstrap operation
Fully operational to +600V
Tolerant to negative transient voltage
dV/dt immune
n
Gate drive supply range from 10 to 20V
n
Undervoltage lockout for all channels
n
Over-current shutdown turns off all six drivers
n
Independent half-bridge drivers
n
Matched propagation delay for all channels
n
Outputs out of phase with inputs
Product Summary
V
OFFSET
I
O
+/-
V
OUT
t
on/off
(typ.)
Deadtime (typ.)
600V max.
200 mA / 420 mA
10 - 20V
675 & 425 ns
0.8 碌s
Description
The IR2132 is a high voltage, high speed power
MOSFET and IGBT driver with three independent high
and low side referenced output channels. Proprietary
HVIC technology enables ruggedized monolithic con-
struction. Logic inputs are compatible with 5V CMOS
or LSTTL outputs. A ground-referenced operational
amplifier provides analog feedback of bridge current
via an external current sense resistor. A current trip
function which terminates all six outputs is also de-
rived from this resistor. An open drain FAULT signal
indicates if an over-current or undervoltage shutdown
has occurred. The output drivers feature a high pulse
current buffer stage designed for minimum driver
cross-conduction. Propagation delays are matched
to simplify use at high frequencies. The floating chan-
nels can be used to drive N-channel power MOSFETs
or IGBTs in the high side configuration which oper-
ate up to 600 volts.
Packages
Typical Connection
To Order
C
ONTROL
I
NTEGRATED
C
IRCUIT
D
ESIGNERS聮
M
ANUAL
B-165