Integrated
Circuit
Systems, Inc.
ICS9250-11
Frequency Timing Generator for PENTIUM II/III聶 Systems
General Description
The ICS9250-11 is a main clock synthesizer chip for Pentium
II based systems using Rambus Interface DRAMs. This chip
provides all the clocks required for such a system when used
with a Direct Rambus Clock Generator (DRCG) chip such as
the ICS9212-01, 02, 03 and a PCI buffer 9112-17.
Spread Spectrum may be enabled by driving the SPREAD#
pin active. Spread spectrum typically reduces system EMI by
8dB to 10dB. This simplifies EMI qualification without
resorting to board design iterations or costly shielding. The
ICS9250-11 employs a proprietary closed loop design, which
tightly controls the percentage of spreading over process and
temperature variations.
The CPU/2 clocks are inputs to the DRCG.
Features
聲
Generates the following system clocks:
- 6 - CPU Clocks 100/133MHz (2.5V).
- 2 - CPU/2 output for synchronous memory
reference (2.5V).
- 4 - fixed frequency Clocks @ 66.6MHz (3.3V).
- 2 - fixed frequency Clocks @ 33.3MHz (3.3V).
- 6 - IOAPIC Clocks @ 錄 of CPUCLK or 16.667MHz,
synchronous to CPU Clock (2.5V)
- 1 - 48MHz Clock (3.3V)
- 2 - REF Clocks @ 14.31818MHz
0.5% typical down spread modulation on CPU, PCI,
IOAPIC, 3V66 and CPU/2 output clocks.
Uses external 14.318MHz crystal.
聲
聲
Block Diagram
X1
X2
OSC
2
REF (0:1)
Pin Configuration
SPREAD#
PLL
Spread
Spectrum
6
CPUCLK (0:5)
/2
/3
C
o
n
t
r
o
l
/3
/2
4
/4
/2
/2
6
IOAPIC(0:5)
SEL 133/100#
SEL(0:1)
2
CPU/2 (0:1)
3V66 (0:3)
/2
2
3V33 (0:1)
PLL2
48MHz
Power Groups:
VDDREF, GNDREF = REF, X1, X2
VDD66, GND66 = 3V66
VDD33, GND33 = 3V33
VDD48, GND48 = 48MHz
VDDCOR, GNDCOR = PLL Core
VDDLCPU, GNDLCPU = CPUCLK
VDDLCPU/2 , GNDLCPU/2 = CPU/2
VDDLAPIC, GNDAPIC = IOAPIC
56-pin SSOP
9250-11 Rev C 3/20/00
Third party brands and names are the property of their respective owners.
ICS reserves the right to make changes in the device data identified in this
publication without further notice. ICS advises its customers to obtain the
latest version of all device data to verify that any information being relied
upon by the customer is current and accurate.