鈥?/div>
3.3V outputs: SDRAM, PCI, REF, 48/24MHz
2.5V outputs: CPU, IOAPIC
20 ohm CPU clock output impedance
20 ohm PCI clock output impedance
Skew from CPU (earlier) to PCI clock - 1.5 to 4 ns,
center 2.6 ns.
No external load cap for C
L
=18pF crystals
鹵175 ps CPU clock skew
250ps (cycle to cycle) CPU jitter
Smooth frequency switch, with selections from 66.8
to 150 MHz CPU.
I
2
C interface for programming
3ms power up clock stable time
Clock duty cycle 45-55%.
48 pin 300 mil SSOP package
3.3V operation, 5V tolerant inputs (with series R)
<5ns propagation delay SDRAM from Buffer Input
Pin Configuration
Block Diagram
48-Pin SSOP
* Internal Pull-up Resistor of 240K to VDD
** Internal Pull-down resistor of 240K to GND
Power Groups
VDD1 = REF (0:1), X1, X2
VDD2 = PCICLK_F, PCICLK(0:4)
VDD3 = SDRAM (0:12), supply for PLL core
VDD4 = 24MHz, 48MHz
VDDL1 = IOAPIC
VDDL2 = CPUCLK 1, CPUCLK_F
Pentium is a trademark of Intel Corporation
I
2
C is a trademark of Philips Corporation
9248-39 Rev F 12/16/99
ICS reserves the right to make changes in the device data identified in
this publication without further notice. ICS advises its customers to
obtain the latest version of all device data to verify that any
information being relied upon by the customer is current and accurate.