鈥?/div>
擄C
%RH
nW
nW
MAXIMUM RATINGS (Absolute Maximum Value)
PIN 2
PIN 4
PIN 8
Control Voltage
PIN 6
Operating Ambient Temperature
Operating Humidity
Average Input Light Power
E
Peak Input Light Power
EG
Input Power
NOTE:
A
at 8 V (or set the HV knob to -8 kV on the front panel of the HPD module power supply C8237) to PIN 8 and 7.5 V (or set the C8237 diode bias
voltage to +150 V) to PIN 6
B
or "-3 kV" to "-8 kV" high voltage on the C8237 front panel
C
or "70 V" to "152 V" diode bias voltage on the C8237 front panel
D
The characteristics of the bias voltage vs. avalanche gain curve of the diode inside are affected by the ambient temperature conditions, and even
under the same ambient temperature conditions resulting curve may differ between diodes from different production lots. Refer to the individual
data sheet attached to the module.
E
at peak sensitivity wavelength
F
without moisture condensation
G
at 3 V (or set the C8237 HV knob to -3 kV) to PIN 8 and 7.5 V (or set the C8237 diode bias voltage to +150 V) to PIN 6. Input light pulse: 50 ns
(FWHM), 200 kHz.
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. 漏2000 Hamamatsu Photonics K.K
1
2
3
4
