鈩?/div>
II
GS9028 Cable Driver
with Two Adjustable Outputs
DATA SHEET
FEATURES
鈥?SMPTE 259M compliant
鈥?two complementary outputs, adjustable from 50 to
1000mVp-p into 75鈩?loads
鈥?operational from DC to 622Mb/s
鈥?nominal 470ps rise and fall times
鈥?< 鹵7% output amplitude control
鈥?45% system power reduction over the GS9008
鈥?no external pulldown resistors required
鈥?input hysteresis
鈥?operational down to 80mV input amplitude
鈥?operates from a single +5 or -5 volt supply
鈥?8 pin SOIC
APPLICATIONS
4茠sc, 4:2:2, and 4:4:4:4 serial digital video interfaces from
143Mb/s to 540Mb/s; general purpose high speed cable
driver applications.
The GS9028 consumes 45% less system power than the
GS9008 and does not require external pulldown resistors
resulting in a smaller PCB footprint. Operational with input
amplitudes as low as 80mV, the GS9028 is a robust serial
interface device.
The GS9028 is packaged in an 8 pin SOIC and operates
from a single +5 or -5 volt supply.
ORDERING INFORMATION
PART NUMBER
GS9028-CKA
GS9028-CTA
PACKAGE
8 pin SOIC
8 pin SOIC Tape
TEMPERATURE
0擄C to 70擄C
0擄C to 70擄C
DESCRIPTION
The GS9028 is a second generation bipolar integrated
circuit designed to drive two 75鈩?co-axial cables.
GS9028
The GS9028 features two complementary outputs whose
amplitude is controlled within 鹵 7%. The output signal levels
are also adjustable from as low as 50mV to as high as
1000mV with little change in other performance parameters.
The output amplitude of the output stage is varied by
adjusting the R
SET
resistor value.
BANDGAP REFERENCE AND BIASING CIRCUIT
R
SET
SDI
SDI
INPUT
DIFFERENTIAL
PAIR WITH
HYSTERESIS
OUTPUT STAGE
& RISE/FALL TIME
CONTROL CIRCUIT
SDO
SDO
BLOCK DIAGRAM
Revision Date: April 2000
GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3
Tel. +1 (905) 632-2996 Fax. +1 (905) 632-5946 E-mail: info@gennum.com
www.gennum.com
Document No. 521 - 68 - 04
1
2
3
4
5
6
7
