MODULE
APD module
C5460 series
APD module integrated with peripheral circuits
Features
Applications
l
Evaluation of APD
Two types of APDs with different active areas (蠁1.5 mm,
l
Fluorescence measurement
蠁3.0
mm) are provided.
l
Bar code readers
l
On-board high sensitivity circuit optimized for APD evaluation
l
Particle counters
An APD and a low-noise current-to-voltage amplifier circuit
l
Film scanners
are mounted on a compact PC board. The current-to-voltage
amplifier circuit features a low-noise configuration allowing
low-light-level detection.
l
Detects optical signals from fixed light (DC light)
C5460 detects optical signals from fixed light (DC light) to
10 MHz pulsed light making it well suited for bar code
readers and film scanners. C5460-01 covers a narrower
bandwidth from fixed light (DC light) to 100 kHz pulsed light,
but provides an excellent NEP of 20 fW/Hz
1/2
in the room
temperature, making it suitable for fluorescence measurement
and particle counters where low-light-level detection is essential.
l
Built-in temperature-compensated bias power supply
The bias power supply is controlled with a thermosensor to keep
the APD gain constant. Gain variations are typically held within
鹵2.5 % at an ambient temperature of 25 鹵10 藲C. Ripple noise
usually inherent to high-voltage power supplies is also minimized.
l
Compact and lightweight
The board is no larger than a typical business card.
l
Low price
l
Custom models with different dimensions and specifications
are available
s
Selection guide
Parameter
Active area
Photo sensitivity
Frequency bandwidth
C5460
蠁1.5
1.5 脳 10
6
DC to 10 M
HIGH VOLTAGE
GENERATOR
+200
V
+12
V
VOLTAGE
CONTROLLER
鹵12
V
l
Uses high sensitivity APD
C5460-01
蠁3.0
-1.5 脳 10
8
DC to 100 k
Unit
mm
V/W
Hz
s
Block diagram
BNC CONNECTOR
TEMPERATURE MONITOR
LOW-NOISE CURRENT-TO-VOLTAGE AMPLIFIER CIRCUIT
APD
THERMOSENSOR
KACCC0028EA
1
2
3
4
