鈥?/div>
Extremely low cost
High switching capacity 鈥?16 Amps
DC coils to 48 VDC
UL, CUR file E44211; VDE file 6820
5
Class B insulation for high temperature operation
Class F insulation available
CONTACTS
Arrangement
Ratings
Medium Duty
SPST (1 Form A)
SPDT (1 Form C)
Resistive load
Max. switched power: 150 W or 2770 VA
Max. switched current: 10 A
Max. switched voltage: 30 VDC or 300 VAC
UL Rating:
5 A at 30 VDC
10 A at 277 VAC
1/3 HP at 125 VAC (1 Form A)
2.9 A 125 VAC pilot duty (1 Form A)
Max. switched power: 480 W or 4000 VA
Max. switched current: 16 A
Max. switched voltage: 30 VDC or 300 VAC
UL Rating:
12 A at 28 VDC
12 A at 277 VAC
16A at 250 VAC
2.0 A at 240 VAC pilot duty
Silver alloy
<100 milliohms initially
(24 V, 1 A voltage drop method)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time
(typical)
Release Time
(typical)
Minimum operations
1x10
7
1 x 10
5
at 10A, 277 VAC
10 ms at nominal coil voltage
5 ms at nominal coil voltage
(with no coil suppression)
Heavy Duty
Dielectric Strength
1750 Vrms contact to coil
(at sea level for 1 min.)
1000 Vrms across contacts
Insulation Resistance
Dropout
Ambient Temperature
Operating
100 megohms min. at 20擄C, 500 VDC,
50% RH
Greater than 10% of nominal coil voltage
At nominal coil voltage
Class B: -40擄C(-40擄F) to 105擄C(221擄F)
Class F: -40擄C(-40擄F) to 130擄C(266擄F)
Class B: -55擄C(-67擄F) to 130擄C(266擄F)
Class F: -55擄C(-67擄F) to 155擄C(311擄F)
0.062" DA at 10鈥?5Hz
10 g
P.B.T. polyester
Tinned copper alloy, P.C.
270擄C (518擄F)
5 seconds
80擄C (176擄F)
30 seconds
13 g
Material
Resistance
COIL
Power
At Pickup Voltage
(typical)
Max Continuous
Dissipation
Temperature Rise
Temperature
230 mW
Class B: 1.7 W at 20擄C (68擄F) ambient
Class F: 2.2 W at 20擄C (68擄F) ambient
25擄C (45擄F) at nominal coil voltage
Class B: Max. 130擄C (266擄F)
Class F: Max. 155擄C (311擄F)
Storage
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
NOTES
1. All values at 20擄C (68擄F).
2. Relay may pull in with less than 鈥淢ust Operate鈥?value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.
5
AZ942-1CT unsealed version is VDE approved at 5 A,
250 VAC, 50,000 operations. AZ942-1CT sealed or unsealed
version is VDE approved at 7 A, 250 VAC, 6,000 operations.
ZETTLER
electronics
200-06-09
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
1
2
