鈥?/div>
Contacts rated at 3, 5, 10 or 16 Amps
DC coils to 48 V
Extremely low cost
Life expectancy to 10 million operations
Epoxy sealed
UL, CUR file E44211; VDE 10056
5
Class F available
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Minimum operations
1x10
7
1 x 10
5
at 12 A 120 VAC Res.
6 ms at nominal coil voltage
2 ms at nominal coil voltage
(with no coil suppression)
CONTACTS
Arrangement
Ratings
Light Duty
SPDT (1 Form C)
Form A available upon request
Resistive load
Max. switched power: 90 W or 750 VA
Max. switched current: 3 A
Max. switched voltage: 150* VDC or 300 VAC
UL Rating:
3 A at 30 VDC or 250 VAC
Max. switched power: 150 W or 1250 VA
Max. switched current: 5 A
Max. switched voltage: 150* VDC or 300 VAC
UL Rating:
5 A at 30 VDC or 125 VAC
1
/
10
HP @ 125 VAC
Max. switched power: 300 W or 2500 VA
Max. switched current: 12 A
Max. switched voltage: 150* VDC or 300 VAC
UL Rating:
5 A at 30 VDC
12 A at 125 VAC
1
/ HP @ 125 VAC
4
1
/ HP @ 250 VAC
2
Max. switched
Max. switched
Max. switched
UL Rating:
16
10
power: 300 W or 4000 VA
current: 16 A
voltage: 150* VDC or 300 VAC
A at 125 VAC
A at 30 VDC
Medium Duty
Dielectric Strength
1500 Vrms contact to coil
(at sea level for 1 min.)
750 Vrms contact to contact
Meets FCC part 68.302 1500 V lightning
surge
Meets FCC part 68.304 1000 V dielectric
Insulation Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
100 megohms min. at 20擄C, 500 VDC,
50% RH
Greater than 10% of nominal coil voltage
At nominal coil voltage
-40擄C (-40擄F) to 70擄C (158擄F)
-40擄C (-40擄F) to 105擄C (221擄F)
0.062" (1.5 mm) DA at 10鈥?5Hz
10 g
P.B.T. polyester
Tinned copper alloy, P.C.
270擄C (518擄F)
5 seconds
80擄C (176擄F)
30 seconds
13 grams
Heavy Duty
Extra Heavy
Duty
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Material
Resistance
Silver cadmium oxide
< 100 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max Continuous
Dissipation
Temperature Rise
Temperature
230 mW
1.1 W 20擄C (68擄F) ambient
.86 W 40擄C (104擄F) ambient
27擄C (49擄F) nominal coil voltage
Max. 105擄C (221擄F)
Max. 130擄C (266擄F) Class B
Max. 155擄C (311擄F) Class F
NOTES
1.
2.
3.
4.
5
All values at 20擄C (68擄F).
Relay may pull in with less than 鈥淢ust Operate鈥?value.
Unsealed relays should not be dip cleaned.
Specifications subject to change without notice.
Only AZ941-1CT unsealed version is VDE approved at 5A,
250 VAC.
ZETTLER
electronics GmbH
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2003-04-08
Junkersstrasse 3, D-82178 Puchheim, Germany
1
2
